Auber 103 question

[rmckinjr]

I'm thinking of getting a bundle Bosster Sensor Gauge with the Auber 103. Can I change the scale on the gauge so it will show relative pressure (ie..off set the measurement scale by -14.696) ? I know the sensor should be linear and it voltage scale is locked in.

[colnny]

Yes, it can. Please see the installation guide for details.
http://www.auberins.com/images/Manual/A ... 0Guide.pdf

"If you want display zero at atmosphere pressure, shift the PuL and PuH down be one atmosphere pressure unit (standard atmosphere =1.00bar or 14.5PSI).
For display in Bar, PuL = 0.01076-1 = -0.99, PuH = 3.154-1 = 2.15
For display in PSI, PuL= - 14.4, PuH = 31.2"

[rmckinjr]

I thought it could, thanks