Operation manual for Gaggia Classic PID w/pre-infusion & stm

Operation manual for Gaggia Classic PID w/pre-infusion & stm

Postby dspear99ca » Wed Sep 07, 2016 4:53 pm

I recently acquired a Gaggia Classic with an Auber PID controller installed. I'd like to increase the brew temp a couple of degrees but have no idea how to do this. There are four buttons on the front: SET, run-program, up-arrow, down-arrow. Run-program does a 1s pre-infuse followed by about 1s pause, then 30s pump on.

I've registered for an account on the Auber website but I don't see anywhere that I can download a manual. Can anyone send me a copy or tell me where to download one?


Posts: 1
Joined: Wed Sep 07, 2016 4:44 pm

Re: Operation manual for Gaggia Classic PID w/pre-infusion &

Postby Sharron » Thu Sep 08, 2016 1:45 pm

Thanks for posting your question here. If you ordered the kit from Auber's website and had an account, you'll be able to download the manual when you log in. But if you purchased it from other vendors, you can contact Auber's customer service to request a copy of the manual.

To change the timer setting, press SET key and then enter code 0001. There are three timer parameters related to brew timer. Tp is pre-infusion time, Td is dwell time, and Tb is brew time.
Posts: 93
Joined: Tue Sep 03, 2013 3:48 pm

Return to Controller for Gaggia

Who is online

Users browsing this forum: No registered users and 1 guest