I bought Auber1813 and I have a small problem.
I have a sensor P200 and that's the problem.
At 10 ° C in fact, Auber1813 show 300 ° C.
It would not be such a problem, it would compensate by ZERRO OFFSET. The problem is the range of measurement. If I set at 300 ° C to 0 ° C, so EEEE occurs around 300 ° C and I have P200 certificated to 1000 ° C
My question is, is it possible increase the range of measurement? Or another way to use P200 on 1813?