1/16 DIN PID Temperature Controller (Relay Output)

This is a dual display 1/16 DIN size (1.89x1.89" or 48 x 48 mm) temperature/process controller. Common applications of this controller include temperature control of industrial equipment, laboratory equipment, espresso machines, beer brewing systems, BBQ grills/smokers, heat treatment ovens, glass kilns, and aquariums.
 
The controller uses an advanced artificial intelligent enhanced PID algorithm that can handle systems that are usually sluggish/difficult to control when controlled by a traditional PID controller. In most cases, the controller will hold the temperature within a reasonable range of the default PID parameters. The auto-tune feature will improve control accuracy and stability within one degree of accuracy. In most cases, there is no need for the user to toggle the confusing PID parameters in order to get the system stabilized.
 
This high precision, full featured industrial grade controller supports more than twenty different input devices that cover almost every possible application requirement. Two alarm outputs can be activated by more than 10 situations. All the control and setting parameters are stored in the non-volatile memory even when the controller is powered off. Recently, we added an advanced cold junction compensation circuit to further reduce the temperature drift when the thermocouple sensor is used. 
 
One of the unique features of this controller is that the built-in relay can handle 10 A of current at 120VAC. That means 1200 watts of load can be connected directly to the controller without the need of an external relay or SSR. That is a very convenient for applications in which only a small heater is used.

Features:

• PID control with fuzzy logic enhancement for outstanding stability control
• 0.2% accuracy over the entire input range
• Displays in either Fahrenheit or Celsius temperature unit
• Percent output indication for easy troubleshooting of the system
• Supports both heating and cooling mode,
• Built-in 10 A relay output with both NC and NO contacts
• Auto/manual control with bump less transfer
• Dual alarm outputs with 10+ activation methods/situation
• Selectable security access levels
• High brightness, large LED display - easily read from distance
• Manual, technical support and 90-days warranty

Main Specifications:

Input type	TC: K, E, S, WRe, J, T, B, N RTD: Pt100, Cu50, 0-80 ohm, 0-400 ohm. DC voltage:0~20 mV, 0-100 mv, 0~5V, 1~5V, 0~1V, -100~100mV, -20~20mV, -5~5V, 0.2~1V. DC Current: 4~20mA.
Input range	K (-60~2300ºF), S (-60~3100ºF), WRe (32~4150ºF), T (-330~660ºF), E (32~1500ºF), J (32~1800ºF), B (32~3300ºF), N (32~2400ºF), Pt100 (-320~1100ºF), Cu50 (-60~300ºF), Linear input: -1999~+9999 defined by user
Display	Two lines, Four digits. °F or °C.
Display Resolution	1°C and 0.1 °C. or 1°F,
Accuracy	±0.2% or ±1 unit of full input range
Control mode	Fuzzy PID, Manual control, On-Off
Output mode	Relay w/ NO and NC contacts: 7A at 240VAC, 10A at 120VAC, or 10A at 120VAC
Alarm	Process high/low alarm, deviation high/low alarm
Alarm output	Relay contact: 1A at 240VAC, 3A at 120VAC, or 3A at 24VAC
Power supply voltage rating	85~264VAC/50~60Hz
Front panel dimension	1.89 x 1.89", or 48 x 48 mm (1/16 DIN)

Default setting:

Input sensor: K type thermocouple (sensor not included).
Display Unit: Fahrenheit (°F)
Display resolution: 1 degree.
Alarm 1: Deviation low
Alarm 2: Deviation high

Click here to download instruction manual.