1/16 DIN PID Controller w/Ramp/Soak (Built-in SSR output)


  • Model: SYL-2372P


Product Description:


  • 30 programmable steps for ramp, soak and other logic actions
  • PID control with fuzzy logic enhancement
  • Dual alarm outputs made standard at no extra charge
  • 0.2% accuracy over the entire input range
  • Displays in either Fahrenheit or Celsius temperature unit
  • Percent output indication
  • Selectable security access levels
  • High brightness, large LED display easily read from distance
  • Manual, technical support and 90-days warranty


This is a dual display, 1/16 DIN (48 x 48 mm) programmable PID temperature/process controller. This controller is for applications where it is desirable to have the set point automatically adjust over time. Up to 30 steps can be programmed to A) ramp the temperature up or down at controlled rate; B) maintain the temperature for a specific period time; C) turn on/off the relays (alarm relay) after process reaches a specific step; D) have high flexibility in program commands such as jump (for loops), run, hold and stop after process reaches a specific step.

This controller has all the features of the standard SYL-2372 PID controller (except the manual control mode). The dual alarm relay can be activated either by the temperature set point or by program steps. And can be used to interlock other equipments in the process.

If you don't need the ramp/soak action, please see the SYL-2372.

This unit has a built-in zero-crossing solid state relay (SSR) that can handle 2 Amp of load. The zero-crossing switching feature will avoid the noise caused by inductive load. It makes the controller more stable than the controller with relay contact output (SYL-2342P) when switching inductive load such as a contactor, solenoid valve, and small motor.

Please note that this is NOT for our DC triggered AC SSR. It can not handle more than 300W (at 110V ) either.

Main Specifications:

Input type TC: K, E, S, WRe, J, T, B, N
RTD: Pt100, Cu50, 0-80 ohm, 0-400 ohm.
DC voltage:0~20 mV, 0-100 mv, 0~5V, 1~5V, 0~1V, -100~100mV, -20~20mV, -5~5V, 0.2~1V.
DC current: 4~20mA.
Input range K (-60~2300ºF), S (-60~3100ºF), WRe (32~4150ºF), T (-330~660ºF), E (32~1500ºF),
J (32~1800ºF), B (32~3300ºF), N (32~2400ºF)Pt100 (-320~1100ºF), Cu50 (-60~300ºF)
Linear input: -1999~+9999 defined by user
Display Two lines, Four digits. °F or °C.
Display Resolution 1°C and 0.1 °C. or 1°F
Accuracy ±0.2% or ±1 unit of full input range
Control mode Fuzzy PID, Manual control, On-Off
Output mode Built-in 2A SSR with zero crossing switching 20-240VAC
Alarm Process high/low alarm, deviation high/low alarm
Alarm output Relay contact: 1A at 240VAC, 3A at120VAC, or 3A at 24VAC
Power supply
voltage rating
Front panel
1.89 x 1.89", or 48 x 48 mm (1/16 DIN)

Default setting:

Input sensor: K type thermocouple (sensor not included).
Display Unit: Fahrenheit (°F)
Display resolution: 1 degree.
Alarm 1: Deviation low
Alarm 2: Deviation high

Click here to download instruction manual (Part 1).
Click here to download instruction manual (part 2).

This product was added to our catalog on Thursday 05 April, 2012.

Copyright © 2014 auberins.com. Powered by Zen Cart