Snap-on Blower for Charcoal Smoker 20 CFM

This is a snap-on blower that can be installed on many smoker pit without using any adapter.  The requirement is that the mouting hole should be less than 1.85 (48 mm) at the maximum dimention. This unique design (patent pending) is much easier to install than the other product on the market. Click here to see how easy it is to install or remove the blower.  If the snap-on spring can't be used, the flange of the blower also has four mounting holes for screw mounting. The blower has a built-in shutter that completely blocks the draft when the fan motor stops.

For the Kamado style smoker (such as Big Green Eggs, Primo and Grill Dome) that has a sliding door for ventilation, an adapter plate is needed.  We currently offer the adapter for extra large Big Green Eggs, The outer dimension is 2.5 x 3.4" (64x87mm). For the other brand smoker, user needs to measure the height of its ventilation door. If it is less than 90 mm, user can trim the adapter for extra large Big Green Eggs to make it fit. 

Please select the adapter you need from the bottom of the page.

Specifications:
• Power source: 12 VDC, 0.68A, 8W.
• Cable length: 4.5 ft (1.4 M).
• Electric power connector, 5.5 mm OD, 2.5 mm ID.
• Blower maximum flow rating. 20 CFM
• Blower opening 1.2x1.6" (30x40 mm).
• Maximum venting hole size for snap-on mounting: 1.85" (48 mm)..
• Flange outer dimension. 2.0 x2.5" (49x 62mm). 
• Flange mounting hole distance 34 x 53 mm, hole size,3 mm in diameter.
• Warranty: 90 days

Click here for installation guide.