Mini Power Relay SPDT 120V 30A

This relay provides a simple and economical solution for switching any size 120V operated heater or motor. It is single pole, compact, C-form (one normal open, NO, and one normal close, NC), 120VAC coil voltage, and rates up to 30A of load. It is shipped with 5 insultaed connector as shown in the picture.

  

Compared with ice cub relay, this relay is more compact and expoxy sealed. All the connection are recessed. When connected with insulated connectors, it can be opreated out side of the controller box.

Compared with using an SSR, the advantage of this relay is compact size, no need for heat sink, no heat dissipation issue, real dry cut off and economical price. The disadvantage is limited life time and has to be switched at lower frequency than the SSR. If you don't need super high precision control (within 1 degree) and don't mind a small clicking sound, this relay is a better choice than the SSR. 

Specifications

Type	Power Relay
Nominal Coil Voltage	120V
Contact Form	SPDT (1 Form C)
Relay Type	1xNC, 1xNO
Life Expectancy	Mechanical 1 x 107 Electrical 1 x 105at 30 A 120 VAC Res. N.O.
Contact Max Current	NO/NC 30A/20A at 277VAC NO/NC 20A/10A at 28VDC NO/NC 2.0/0.5HP at 250VAC
Termination Style	Quick Connect
Pin Count	5
Operating Temperature	-55 to 85 °C (-67 to 185 °F)
Minimum Dropout Voltage	>24VAC
Maximum Pick-Up Voltage	102 VAC
Mounting	Flange Mount
Dimension	50.2 x 27.5 x 27.8mm (1.97 x 1.08 x 1.09 inch)