This project box can be used for mounting the 1/16 DIN sized controller or timer. It is made of aluminum extrusion with good heat dissapation. It can dissipate the heat generated from SSR when passing 20 amp current.
Three front panel options are available. Precut option has a 45 x 45 mm pre-cut hole that fits our 1/16 DIN sized controller. The box is finished with black color powder coating. It comes with four rubber feet at the bottom. It also comes with two plastic moldings for the front and back panel so that all the seams can be covered with a more professional look. Outer dimensions (W x H x L, not including the plastic molding) are: 150 x 80 x 227 mm (6 x 3.15 x 9 inch).
Click here for how to cut the instrument panel.
Assembling parts: Front panel has a 45 x 45 mm cut that fits our 1/16 DIN controller.
Front panel option: Top: Uncut; Middle: Center precut; Bottom: Offset precut
Top view of the inside of the enclosure, showing the installation and wiring of one 1/16 DIN sized temperature controller, one 25A SSR, one switch, one fuse holder, and one power socket.
This product was added to our catalog on Tuesday 29 October, 2013.