This controller enclosure measures 16" x16" x 8" (400 x 400 x 200 mm). Four 1/16 DIN sized controllers or timers can be installed with adequate room for wiring and switching device. This box is made of powder coated, 0.060" (1.5 mm) thick steel, which is available in beige and black color. Strong and durable industrial flat textured black finish makes the final finish paint easier. If you panel will be in black color, we recommend you to start with the black enclosure. If you start with beige color and paint to black later, it will not look as nice because the top paint may not be as strong as the powder coated base. When the top paint wares out, it will look bad.
The door comes with a lock and key. The hinges of the door are removable. It can be installed on either right or left side. Gasket and plugs are provided. The enclosure is designed to be mounted on a wall. You can directly mount it with screws or hang it on the wall with the hangers (included).
An external mounted heat sink option for 80 Amp is offered. The heat sink comes with pre-drilled and tapped mounting holes for SSR mounting. Up to 3 SSRs can be mounted. This external mounted heat sink eliminates the venting requirement of the enclosure for internally mounted heat sink. The dimension for the heat sink is 135mm x 250mm x 30mm (5.3" x 9.9" x 1.2").
Top: Adapter plate for 80A heat sink. Bottom: Original cover plate.
All plates are availables in beige and black finish.
Enclosure: 1 pc
80A heat sink (Optional): 1 pc
Heat sink cover plate (Original / Precut): 1 pc
Screws for heat sink cover: 10 pcs
Soft caps: 6 pcs
Grounding sticker: 1 pc
Hanger: 4 pcs
Hanger screw and nut: 4 sets
This product was added to our catalog on Wednesday 09 July, 2014.