DIN Rail Terminal Block Kit

Starting at: $16.95


  • Model: DRTK
  •  
     



    Qty.

    Please Choose:

    System Option








Product Description:

This DIN Rail terminal kit provides all the essential parts that you will need to split the wire for a control panel. Two kits are available for 30A or 60A systems. 

This kit includes several components:

1) Terminal block and jumper. When multiple blocks are joined together by jumper, one incoming wire can be split into multiple outgoing wires. In the Assembled kit (see pictures below), the left most three blocks are joined by two jumpers, making them a 6 port wiring terminals. The port 1 has a black input wire; port 2-6 can be used for 5 outgoing wires. These parts are UL and CE approved. For the kit of 30Amp system, it can support up to 30A current and are compatible with 22-10 AWG wire. For the kit of 60Amp system, it can support up to 60A current and are compatible with 20-6 AWG wire.

2) Terminal separator/cover. It serves two roles in a DIN Rail systems: a) it physically separates two neighboring terminal blocks into two groups; b) it also covers the exposed side of a terminal block. For example, you can use it to separate the hot wire terminal blocks from the neutral wire blocks.

3) Stopper. Most of DIN Rail components can slid on the rail. Put two stoppers at both ends can hold the components in place. The stopper should be mounted on either ends and be screwed tightly.

4) Label. It allows you to mark a terminal block. There is a small stud that clips onto the terminal. One terminal block requires 2 pieces of labels. The extra labels are provided for further modifications.

5) Wire ferrules for 10 and 14 AWG wires. Ferrules are only needed when using stranded wires instead of solid wires. DIN Rail devices do not accept commonly used spade or ring type terminals. If stranded wire is installed without any terminal treatment, the apparently well-tightened wire may get loose over time. Crimping a ferrule at the end of the stranded wire can prevent this problem from happening. The ferrule can also reduce the contact resistance and oxidation. Laboratory tests have proven that the use of ferrules can extend contact lifetime by preventing an increase in resistance and temperature, which can lead to short-circuits and/or failures.




All the components included in 30A kit.


All the components included in 60A kit.


Assembled picture (circuit breaker and contactors are not included). 

30A System Included parts:
6 x terminal block: 600V, 30A, 10-22AWG, UL certified
1 x separator/cover
4 x two-pole jumper
2 x stopper(End Bracket)
20 x label (tag)
16 x ferrule for 10 AWG wire
16 x ferrule for 14 AWG wire
 
60A System Included parts:
6 x terminal block: 600V, 60A, 20-6AWG, UL certified
1 x separator/cover
4 x two-pole jumper
2 x stopper(End Bracket)
14 x block label(tag)
16 x ferrule for 10 AWG wire
16 x ferrule for 14 AWG wire 


Current Reviews: 1

This product was added to our catalog on Tuesday 12 August, 2014.

Copyright © 2017 auberins.com. Contact sales@auberins.com