Powder Coating Oven Controller Kit ( 240V 30A 7200W)

Starting at: $250.00  $230.00
Save: $20.00 off

  • Model: KIT-PCO


    Please Choose:

    Output Connector Option


    Manual Option

Product Description:

Summer sale ends on 7/24/2017!

This is a kit to DIY your control system for powder coating oven (approx. 3'x3'x4' size). The circuit is designed for a 240 V system with a total oven draw no more than 30 Amps. In addition to a PID controller with built-in timer, it also has a flashing buzzer for high temperature alarm and indicator for showing heater status. Wiring diagram and punching specification are available after purchase.
This kit includes each of the following:
  • 10x8x6" Wall mount enclosure with hanger and 40 A heat sink.
  • Dual-line display PID controller with built-in timer function.
  • 40 A Solid State Relay.
  • Flashing Buzzer for temperature/timer alarm.
  • Yellow LED for indicating heater status.
  • Red illuminated selector switch for alarm silence.
  • Yellow illuminated selector switch for element control.
  • Blue illuminated momentary push-button switch for reseting timer.
  • Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
  • Leviton 240 V 30 A NEMA L6-30R Socket for heater connection.
  • 30 A Strain Relief Power Cord Connector for hard-wiring the power line. 
  • 2 Pole 32 A Main Breaker as power switch.
  • DIN Rail Terminal Block Kit for power system building. 
  • Engraved Panel Tags for labeling.
The kit does not include:
  • Heating element.
  • Input power cord, 4 conductor (10/4).
  • Wiring and wiring fittings.
  • The enclosure only has one precut for 1/16 DIN controller on the front panel.
  • If you want the kit for gas burner, please contact us

Warranty: 6 months.

The final look of a complete project is below:

Front View

Bottom View 

This product was added to our catalog on Tuesday 19 July, 2016.

Copyright © 2017 auberins.com. Contact sales@auberins.com