Distill Controller Kit ( 240V 30A 7200W)

Starting at: $300.00


  • Model: KIT-DISTILL
  •  
     



    Qty.

    Please Choose:

    RTD Probe Option:





    Output Connector Option




    Download




    Manual Option








Product Description:

 

This is a kit to DIY your electric distill system. The circuit is designed for a 240 V system no more than 30 Amps. If you have one 5000-Watt heater or two 3000-Watt heater, this is the right choice. In addition to a programmable controller, it also has a flashing buzzer for high temperature alarm and indicator for showing heater status. Wiring diagram and punching specification are available after purchase.
 
To learn more about the power regulator DSPR400, please go to here.

Seven tri-clamp probe options are available. Please leave a note for the tri-clamp probe# you need. 

Tri-clamp Probe# Part# Flange OD Probe Length
1 PT100-C 1.988” (50.5mm) 1.38” (35mm)
2 PT100-C 1.988” (50.5mm) 2.36” (60mm)
3 PT100-C 1.988” (50.5mm) 6” (150mm)
4 PT100-C 1.988” (50.5mm) 8” (200mm)
5 PT100-C-2 2.52” (64mm) 2.36” (60mm)
6 PT100-C-2 2.52” (64mm) 6” (150mm)
7 PT100-C-2 2.52” (64mm) 8” (200mm)
 

This kit includes each of the following:
  • 10x8x6" Wall mount enclosure with hanger and 40 A heat sink.
  • Dual-line display power regulator with 0.1 degree accuracy.
  • 40 A Solid State Relay.
  • Flashing Buzzer for temperature/timer alarm.
  • Yellow LED for indicating heater status.
  • Red illuminated selector switch for alarm silence.
  • Yellow illuminated selector switch for element control.
  • Blue illuminated maintained push-button for power ON/OFF.
  • PT100 Liquid tight RTD sensor with braided cable and XLRCON-M connector.
  • Leviton 240 V 30 A NEMA L6-30R Socket for heater connection.
  • 30 A Strain Relief Power Cord Connector for hard-wiring the power line. 
  • 3 pole 120V Coil contactor.
  • Engraved Panel Tags for labeling.
 
The kit does not include:
  • Heating element.
  • Input power cord, 4 conductor (10/4).
  • Wiring and wiring fittings.
 Note:
  • The enclosure only has one precut for 1/16 DIN controller on the front panel.
  • If you want the kit with an additional thermometer, please contact us

Warranty: 6 months.


A sample look of an assembled unit:



Front View

Bottom View 



This product was added to our catalog on Friday 08 September, 2017.

Copyright © 2017 auberins.com. Contact sales@auberins.com