Powder Coating Oven Controller Kit, 2nd Gen ( 240V 50A 12000W)

Starting at: $418.00

  • Model: KIT-PCO2


    Please Choose:

    Output Connector Option


    Manual Option

Product Description:


This is our second generation kit to DIY a control system for powder coating oven (approx. 4'x4'x6' size). The circuit is designed for a 240 V dual output system with a total oven draw no more than 50 Amps. It not only has an additional timer readout, but also independent control for dual heater output. Wiring diagram and punching specification are available after purchase.
This kit includes each of the following:
  • 10x8x6" Wall mount enclosure with hanger and 60 A heat sink.
  • Dual-line display PID controller w/ connection to the timer.
  • Two pieces of 40 A Solid State Relay, each for one heater channel.
  • Dual-Line general purpose timer.
  • Flashing Buzzer for temperature/timer alarm.
  • Yellow LED for showing heater status.
  • Red illuminated selector switch for timer alarm silence.
  • Red illuminated selector switch for temperature alarm silence.
  • Two yellow illuminated selector switches for element control.
  • Blue illuminated selector switch for reseting timer.
  • Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
  • Leviton 240 V 30 A NEMA L6-30R Socket for each heater channel.
  • Strain Relief Power Cord Connector for hard-wiring the power line. 
  • Breaker Switch for main power control.
  • DIN Rail Terminal Block Kit for power system building.
  • Engraved Panel Tags for labeling.
The kit does not include:
  • Heating element.
  • Input power cord.
  • Wiring and wiring fittings.
  • The enclosure only has two 1/16 DIN precut on the front panel.
  • If you need the KIT for gas oven, please contact us

Warranty: 6 months.

A sample look of a complete project is below:

Front View

Bottom View

This product was added to our catalog on Thursday 16 March, 2017.

Copyright © 2017 auberins.com. Contact sales@auberins.com