Digital Auto Gauge (Round) with Pressure Sensor

  • Model: Combo-MR-P

Ask a Question

Starting at: $104.95

Please Choose:





Add to Cart:

This round multi-functional auto gauge (SYL-1813-MR) is essentially a SYL-1813 gauge but fitted in a conventional round metal case. Compared to our 1/32 DIN sized SYL-1813 gauges, the new round appearance matches with other round gauges on the instrument panel. It is also easier to be mounted to an A-pillar pod.   

Front Panel Side View of the
Mounting Bracket
Wiring Terminals
LED display colors that are available: white, blue, green, and red.

This digital automobile gauge can be used to measure temperature, pressure and other important parameters, such as battery voltage and air/fuel ratio. Its bright LED display is easy to read from a distance compared to many dim LCD type digital gauges. The programmable alarm will turn on a blue LED in the front panel to get the driver's attention if the temperature/pressure is above the setting point. It will also close a relay output port that can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan. The meter stores the peak temperature/pressure with time stamps that can be checked later. It can also operate in the peak holding mode so that only the maximum value is displayed. The brightness of the LED display can be synchronized with headlight. When the headlights is turned on at night, the display will be dimmed by the illumination signal. It can also be dimmed directly on the key pad. Developed based on industrial grade instruments, this four digits gauge offers up to 10 times the resolution and accuracy of most 3 digits gauges on the market. The gauge also includes cold junction compensation circuit to further reduce the temperature drift when a thermocouple sensor is used. (Please note, each gauge can only be set to measure one type of parameter at a time. It can't measure multiple parameters simultaneously).

Pressure Sensor Options:

Model No. Description
Auber 103 3 bar MAP sensor. Pressure range: 0.4 to 3.0 bar (5.8 to 43.5 psi) absolute pressure
Auber 104 4 bar MAP sensor. Pressure range  0.1 to 4.0 bar (or, 5.8 to 58 psi) absolute pressure
Auber 303 3 Bar boost sensor for Diesel Engine. Pressure range: -0.3 bar to 3.3 bar(-5.0 psi to 48 psi)relative pressure (gauge pressure)
Auber P205a 5 BAR (75 PSI) absolute pressure sensor for boost or MAP. Pressure range  0.0 to 5.0 bar (0 to 75 psi) absolute pressure
Auber P205g 5 BAR (75 PSI) gauge pressure sensor. Pressure range: 0.0 to 5.0 bar (0 to 75 psi) gauge pressure (relative pressure)
Auber P207 7 BAR (100 PSI) gauge pressure sensor. Pressure range: 0.0 to 7.0 bar (0 to 100 psi) gauge pressure (relative pressure)
Auber P210 10 Bar (150 PSI) fuel/oil pressure sensor. Pressure range.  0.0 to 10.0 bar (0 to 145 PSI) absolute pressure
Auber P218 18 Bar (260 PSI) fuel/oil pressure senser. Pressure range.  0.0 to 18.0 bar (0 to 260 PSI) absolute pressure

 

Auber 103/104 Auber-303 Auber P205/P210/P218

SYL-1813-MR Gauge Specifications:

Input type Temperature Sensor, K, E, S, R, J, T, B, WRe3-WRe25, Pt100, Cu50
Pressure transducer, 0-375 ohm, 0-5 V, 0-75 mV
Other transducer: 0-30 mV, 1-5 V, 0-10 V, 0-10 mA, 0-20 mA, 4-20 mA
Display One lines, Four digits. °F or °C, Bar, PSI, or user defined
Display resolution 1°C, 1°F
Display brightness control 12 V illumination control signal, or key pad
Accuracy ±0.2% or ±1 unit of full input range
Control mode On/Off
Control output Relay contact: 3A at 240VAC
Alarm Relay (3A rating) high/low alarm
Recording function Maximum, Max time, Minimum, Min time.
Recording time 100 hrs with 1 minute resolution.
Power consumption <2 Watt
Power supply voltage rating 12 (8.5~16.5) VDC 
Panel cutout dimension 52 mm diameter (2 1/16 inch)
Dimension 60 x 60 x 59 mm 

Click here for instruction manuaul of SYL-1813-MR
Click here to download Pressure Sensor Application Guide
Click here for engine fuel/oil pressure sensor installation guide


This product was added to our catalog on Friday 03 March, 2017.

Copyright © 2024 auberins.com.