Temperature Controller for X-Large Big Green Eggs

This PID controller is for controlling the temperature of Big Green Eggs smoker. It fits the Extra Large Big Green Eggs, Big Steel Keg, as well as the Bubba Keg Convection Grill.  It will regulate the on/off time interval of the blower to stabilize the temperature in the charcoal smoker. If you want to get more responsitve control at high temperature, please choose the 20CFM blower option.

The system includes:

1) Controller with artificial intelligent enhanced PID control program,  It has bright LED for out door use. It has built-in buzzer that can be set for both low limit and high limit alarm. Developed by industrial control engineers, this controller utilizes an advanced AI (artificial intelligence) enhanced PID algorithm that can hold the cooking temperature within a tight range and prevent temperature overshooting from disturbance such as opening/closing the pit lid, wind, sun, and ambient temperature drops.
2) AC to 12VDC adapter with 1A maximum output.
3) K type thermocouple with alligator clip that can be easily attached to the rack.
4) An adapter plate for extra large Big Green Egg and Bubba Keg.
5) A snap-on blower (6.5 CFM or 20 CFM) that can be installed on the adapter. This unique design (patent pending) is much easier to install than the other product on the market. Click here to see how easy it is to install or remove the blower.
6) 6" of High temperature aluminum foil tape for blocking unused venting holes.

Specifications:

AC adapter	100-240V, 50/60Hz input. 12 VDC, 1 Amp output
Power consumption	<8W. Draws about 0.26A current with 6.5CFM blower, 0.39A with 20CFM blower
Accuracy	0.2% full scale
SSR output for Fan	12VDC, 1 Amp*
LED display	0.39 inch tall, Bright red
Alarm	Two set points with buzzer sound
Sensor	K type thermocouple with 6 ft (2 meters) cable.   -300~550°F (-200~300°C).*
Control Mode	PID, On/off, Limit
Controller Operating Temperature	0~160°F (-20 ~ 70°C)
Controller dimension	2.8x3.5x1.2" (70x90x30mm)
Blower maximum flow rate	6.5 CFM or 20 CFM
Blower opening	6.5 CFM: 0.8x1.0" (20x27 mm) / 20 CFM: 1.2x1.6" (30x40 mm)
Maximum venting hole size for snap-on mounting	6.5 CFM: 1.2" (32 mm) / 20CFM: 1.85" (48 mm)
Flange outer dimension	6.5 CFM: 1.6 x2.0" (40x 50 mm) / 20CFM: 2.0 x2.5" (49x 62mm)
Flange mounting hole	6.5CFM: distance 25 x 41 mm, hole size,3 mm in diameter; 20 CFM: distance 34 x 53 mm, hole size,3 mm in diameter.

 • Warranty: 90 days

*The maximum air flow rating (rated at zero static pressure) may not reflect the true performance of the blower for this application. The static pressure rating is also important. The fan used in Auber blower is from one of the highest quality fan manufacturer. 

     
Included in the kit (the sensor shown is TC-K6A. Probe TC-K3MM-C is also available)

TC-K6A	TC-K3MM-C

     Click here for Quick Guide
Click here for Instruction Manual
Click here for Blower Installation Guide

SYL-1615SYS-G for large Big Green Eggs in use

Blower installed on large Big Green Egg.