1/16 DIN Universal Temperature Controller 12-30V DC PWR

This temperature controller needs to be powered by low voltage DC in the 12 to 30 Volt range. It can be used on batteries, cars, or anywhere there isn't high voltage AC. It is a full function temperature controller that offers PID, on/off, manual and limit control modes. The output of the control signal can be set either for SSR control (8 VDC) or relay/contactor control (through internal 3A relay). The controller has two internal 3 Amp relays that can be set at different on/off temperature in either heating or cooling mode.

*This controller can also be powered by 18 to 30V AC with a simple modification. All you need to do is to add a diode in the power input line. You can request a diode (free or charge) if you need to power it with 24VAC

.Features:

• Dual display for both set temperature and process temperature
• Compact size, 1/16 DIN - 1.89 x 1.89 x 3”
• Supports 10 different types of commonly used temperature sensor inputs
• Configuration for either relay contact or SSR
• Two contact relays can be configured as one PID and one alarm output, dual alarm outputs, or dual on/off control
• Auto-tune function finds the best PID parameter automatically
• Displays temperature in either Fahrenheit or Celsius
• Four digits LED display can go up to "9999"
• 12V, 24V DC or 24V AC power source options (see note for how to powering it with 24VAC)
• On/Off control mode for refrigerator, motor and solenoid valve control application
• Bump less transfer between Auto and Manual control
• Limit control for safety protection and special applications
• 90-days warranty

Main Specifications:

Input type	TC: K, E, S, R, J, T, B, WRe3-WRe25 RTD: Pt100, Cu50
Input range	K (-200~+1300ºC), S (-50~+1600ºC), WRe3-WRe25 (0~2300ºC ), R (-50~+1600ºC), T (-200~400ºC), E (-200~900ºC), J (-200~1200ºC), B (350~1800ºC), Pt100 (-99.9~600.0ºC) or (-200~+600ºC), Cu50 (-50~150ºC)
Display	Two lines, Four digits. °F or °C
Display Resolution	1°C, 1°F, or 0.1°C, 0. 1°F, with Pt100
Accuracy	±0.2% or ±1 unit of full input range
Control mode	PID, On-Off, Manual, Limit
Output mode	Relay contact: 3A at 240 VAC, SSR: 10VDC, 40 mA
Alarm	Process high/low alarm
Power consumption	<2 Watt
Power supply voltage rating	12-30 VDC, or 18-30VAC with addition of a diode
Dimension	48 x 48 x 75mm (1/32 DIN)

Click Here for Instruction Manual.