Oil/Water Temperature Sensor, High Precision.

This sensor is for measuring engine water and oil temperature. Unlike most of other oil/water temperature sensors on the market that use thermistor sensing element, this sensor has a RTD sensing element. The advantage of the RTD is better accuracy and wider temperature range. When used with our SYL-1813 gauge, you will be able to measure from -199 C  to 250 C (or -199F to 500F) with less than 1 degree error.  No other water/oil temperature gauges can match its performance. In addition, you will be able to use all the advanced features that SYL-1813 has, such as max/min temperature recall function, and programmable control output.

This sensor is about the same length as the VDO water/oil temperature sensor with 1/8 NPT mounting. It can be used for port that VDO sensor was used. However, if you are using a plug adapter to mount the sensor into the oil gallery located on the back of the engine block, you might need a longer probe as show as the optional longer sender in the picture below. Click here for the longer sender.

Specification.
Sensor type. Platinum 100 ohm (Pt100) RTD
Precision. Class B
Temperature range (when used with SYL-1813), -199~ 250C or -199~500F.
Mounting thread: 1/8 NPT.
Total length, 22 mm (from the end of the thread)
Diameter, 6 mm
Material, 304 Stainless Steel.
Cable, 2 meters (80 inches) long, three conductors shielded with stainless steel braid.
Please note, this sensor is designed to work with Auber Instruments’ meter only. It will not work with other manufacture’s water/oil temperature gauge unless it is for Pt100 RTD sensor.

Click here to download instruction manual

This sensor is also available with 13ft (4 meters) long cable for $9 extra. To order it, please check the option box below.