This timer controls the run time of the grinder. It is for large grinder with internal contactor such as the Mazzer grinders with automatic switch (On/Off + Start). To use this timer, user needs to open the bottom of the grinder to install a cable (provided) to the coil of the contactor. It needs to be done by an electrician who can read a circuit diagram. Instructions and diagram on some of the most commonly used grinders can be provided.
The timer has three control buttons on the top of the box. Two of them can be programmed to run the grinder for a specific duration (from 0.01 second to 99 minutes). User can set one button for single shot and the other for double shot espresso. The third button is for manually controlling the grinder. It will turn on the grinder when pressed. The time duration of the manual control is displayed. It can be used for fine tuning the single or double shot timer setting.
The controller also has an accumulative timer that accumulates the run time of the grinder until it is reset by the user. The timer unit is programmable. User can set it to second, minute, cups, or convert it to weight units (such as gram, ounce, or pound) with a simple calibration. It is a useful feature for bookkeeping in a commercial coffee shop.
This product has 5 - 7 days lead time.
Specifications
Timer range: 0.01" to 99.99". Or 1" to 99'59"
Power supply: 90 - 260 V AC or DC.
Power consumption: < 2 W
Operating temperature: 0 - 60°C.
Humidity: 0 - 95% RH
Dimension: 120 x 70 x 135 mm (4.72 x 2.75 x 5.25 inch)
Click here for instruction manual (For earlier version that SN starting with 12, click here for instruction manual)
Click here for Mazzer MOD Principle
Click here for guide for connecting to Super Jolly and Mini.
Front View
Back View
This product was added to our catalog on Saturday 10 November, 2012.
