Temperature Controller for 55 G Drum style Smoker, 10 CFM

Starting at: $154.45  $144.45
Save: $10.00 off


  • Model: SYL-1615SYS-10CFM
  •  
     



    Qty.

    Please Choose:








Product Description:

President day sale ends on 2/21/2017!

This PID controller is for controlling the temperature of a medium sized backyard smoker and a 55 gallon drum style smoker. This system contains a 10 CFM blower that is more powerful than the other system we offer. It can bring the temperature of the Weber Smokey Mountain to above 300F.  It is also suitable for large barrel smokers that burn more fuel than the Kamado style smoker. Developed by industrial control engineers, this controller utilizes an advanced AI (artificial intelligence) enhanced PID algorithm that can hold the cooking temperature within a tight range and prevent temperature overshooting from disturbances such as opening/closing the pit lid, wind, sun, and ambient temperature drops.

The system includes:

  1. Controller with artificial intelligent enhanced PID control program. It has bright LED for outdoor use. It has a built-in buzzer that can be set for both low limit and high limit alarm. This controller has been tested for many commonly used smokers with excellent feedback. Most customers found that there is no need to tune. Just set the temperature and run it. 
  2. AC to 12VDC adapter with 1A maximum output. Note: we only carry adapters for two major plugs used worldwide: NEMA1-15 and CEE7/16. For US and most international orders we will ship the adapter for NEMA1-15 by default. For European continental countries we will ship the adapter for CEE7/16. Customers in some countries may need to find a plug converter in local electronic stores to make the adapter fit into their socket.
  3. K type thermocouple with alligator clip that can be easily attached to the rack.
  4. A snap-on 10 CFM blower that can be installed on many smoker pit without using an adapter. The requirement is that the mounting hole should be less than 1.85 (48 mm) at the maximum dimension. This unique design (patent pending) is much easier to install than the other products on the market.  Click here to see how easy it is to install or remove the blower.  If the snap-on spring can't be used, the flange of the blower also has four mounting holes for screw mounting. The blower has a built-in shutter that completely blocks the draft when the fan motor stops.
  5. 6" of High temperature aluminum foil tape for blocking unused venting holes.

Note:
1. Optional Li-ion battery pack is offered. Please check 
here for more details. 
2. Optional inline power switch cord is offered. Please check here for more details.

Specifications:

AC adapter 100-240V, 50/60Hz input. 12 VDC, 1 Amp output
Power consumption <8W. Draws about 0.36A current with 10CFM blower.
Accuracy 0.2% full scale
SSR output for Fan 12VDC, 1 Amp
LED display 0.39 inch tall, Bright red
Alarm Two set points with buzzer sound
Sensor K type thermocouple with 6 ft (2 meters) cable.  -300~900°F (-200~482 °C)
Control Mode PID, On/off, Limit
Controller Operating Temperature 0~160°F (-20 ~ 70°C)
Controller dimension 2.8x3.5x1.2" (70x90x30mm)
Blower maximum flow rating 10CFM
Blower opening 1.2x1.6" (30x40 mm)
Maximum venting hole size for snap-on mounting 1.85" (48 mm)
Flange outer dimension 2.0x2.5" (49x62mm)
Flange mounting hole distance 34x53mm
Flange mounting hole size 3 mm

• Warranty: 1 year for controller and blower, 90 days for sensor

 

Included in the kit (the sensor shown is TC-K6A. Probe TC-K3MM-C is also available)

 

TC-K6A TC-K3MM-C
 
Ball Valve Adapter for Blower (optional)
Showing pictures of adapters for both 6.5 CFM and10&20 CFM Blowers. The Ball Valve Adapter for 10&20 CFM Blower is suitable to the blower in this kit.



Click here for user guide
Click here for instruction manual
Click here for blower installation guide
Click here for common errors.

 



This product was added to our catalog on Saturday 07 September, 2013.

Copyright © 2017 auberins.com. Contact sales@auberins.com