Round Automobile Multimeter, 2 1/16'' (52 mm)

  • Model: SYL-1813-MR

Ask a Question

Starting at: $69.50

Please Choose:



Add to Cart:

This is a newly added product to our automotive product family. It is essentially an SYL-1813 multi-functional auto gauge but fitted in a conventional round metal case. Compared to our 1/32 DIN-sized SYL-1813 gauges, the new round appearance matches with other round gauges on the instrument panel. It is also easier to be mounted to an A-pillar pod.   

Front Panel Side View of the Mounting Bracket Wiring Terminals

 

LED display colors that are available: white, blue, green, and red.


This digital automobile gauge can be used to measure temperature, pressure, and other important parameters, such as battery voltage and air/fuel ratio. Its bright LED display is easy to read from a distance compared to many dim LCD type digital gauges. The programmable alarm will turn on a blue LED in the front panel to get the driver's attention if the temperature/pressure is above the set point. It will also close a relay output port that can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan. The meter stores the peak temperature/pressure with time stamps that can be checked later. It can also operate in the peak holding mode so that only the maximum value is displayed. The brightness of the LED display can be synchronized with headlights. When the headlight is turned on at night, the display will be dimmed by the illumination signal. It can also be dimmed directly on the keypad. Developed based on industrial-grade instruments, this four digits gauge offers up to 10 times the resolution and accuracy of most 3 digits gauges on the market. The gauge also includes a cold-junction compensation circuit to further reduce the temperature drift when a thermocouple sensor is used. (Please note that each gauge can only be set to measure one type of parameter at a time. It can't measure multiple parameters simultaneously).

For EGT measurement, the meter will work with all EGT sensors on the market, grounded or ungrounded. There is no input impendence matching requirement. It can display the temperature in either Celsius or Fahrenheit. The temperature measurement is cold-junction compensated for high accuracy. Very few EGT gauges on the market have the cold junction compensation circuit and most of those gauges cost several times more than this gauge.

For boost pressure measurement, the meter will work with all MAP sensors as long as its pressure/output voltage relationship is known. It can display the pressure in either Bar, PSI, or user-defined units with high resolution. However, it will not display the pressure with two different types of units in one scale such as PSI for pressure range but inHg for vacuum range.

For water/oil temperature measurements, the meter can display from -199°C to 250°C (or -199°F to 500°F) with 1-degree accuracy when used with our RTD sensors. It will also work with our liquid-tight thermocouple-based sensors. In addition, it can work with a VDO 150°C (300°F) sensor with a limited display range (50°C - 150°C). The meter can work with either old-style resistive pressure sensors or modern-style pressure transducers with linear voltage output. The meter offers a regulated 5V DC output for the power supply of the pressure transducer.

For air/fuel ratio measurements, it can be used to display either air/fuel ratio or lambda when interfaced with an Innovate Motorsports' LC-1/LC-2 wideband oxygen sensor controller. Please note that the meter cannot work as a standalone AFR with the oxygen sensor unless you are using a controller.

Specifications:

Input type Temperature Sensors, K, E, S, R, J, T, B, WRe3-WRe25, Pt100, Cu50
Pressure transducers, 0-375 ohm, 0-5 V, 0-75 mV
Other transducer: 0-30 mV, 1-5 V, 0-10 V, 0-10 mA, 0-20 mA, 4-20 mA
Display One line, Four digits. °F or °C, Bar, PSI, or user-defined
Display resolution 1°C, 1°F
Display brightness control 12 V illumination control signal, or keypad
Accuracy ±0.2% or ±1 unit of the full input range
Control mode On/Off
Control output Relay contact: 3A at 240VAC
Alarm Relay (3A rating) high/low alarm
Recording function Maximum, Max time, Minimum, Min time.
Recording time 100 hours with a 1-minute resolution.
Power consumption < 2 Watt
Power supply voltage rating 12 V (8.5V ~16.5V) DC 
Panel cutout dimension 52 mm diameter (2 1/16 inch)
Dimension 60 mm x 60 mm x 59 mm 


Click here for instruction manual.
Click here for EGT sensor installation guide.
Click here to download Pressure Sensor Application Guide.
Click here for water/oil temperature sensor application guide.
Click here to download Voltage Measurement Application Guide.
Click here to download Current Measurement Application Guide.
Click here for engine fuel/oil pressure sensor installation guide.

Click here for resistive pressure sensor installtion guide.
Click here for LC-1/LC-2 Wideband Oxygen Sensor set up.
Click here to download Guide for Boost Gauge Installation.
[PDF] Quick Guide for VDO Water/Oil Temperature sensor.


This product was added to our catalog on Thursday 16 July, 2015.

Copyright © 2024 auberins.com.