Digital EGT Gauge (Round) with Sealed Tip EGT Probe

  • Model: Combo-MR-EGTS

Ask a Question

Starting at: $108.50

Please Choose:





Longer Cable Option




Add to Cart:

This round multi-functional auto gauge (SYL-1813-MR) is essentially a SYL-1813 gauge but fitted in a conventional round metal case. Comparing to our 1/32 DIN sized SYL-1813 gauges, the new round appearance matches with other round gauges on the instrument panel. It is also easier to be mounted to an A-pillar pod.   

Front Panel Side View of the Mounting Bracket Wiring Terminals
LED display colors that are available: white, blue, green, and red.

This digital automobile gauge can be used to measure temperature, pressure and other important parameters, such as battery voltage and air/fuel ratio. Its bright LED display is easy to read from a distance compared to many dim LCD type digital gauges. The programmable alarm will turn on a blue LED in the front panel to get the driver's attention if the temperature/pressure is above the setting point. It will also close a relay output port that can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan. The meter stores the peak temperature/pressure with time stamps that can be checked later. It can also operate in the peak holding mode so that only the maximum value is displayed. The brightness of the LED display can be synchronized with headlights. When the headlight is turned on at night, the display will be dimmed by the illumination signal. It can also be dimmed directly on the key pad. Developed based on industrial grade instruments, this four digits gauge offers up to 10 times the resolution and accuracy of most 3 digits gauges on the market. The gauge also includes an cold junction compensation circuit to further reduce the temperature drift when a thermocouple sensor is used. (Please note, each gauge can only be set to measure one type of parameter at a time. It can't measure multiple parameters simultaneously).

The gauge is supplied with your choice of an EGT (Exhaust Gas Temperature) sensor. The model number is TC-KEGTS.  It is a K type grounded thermocouple with a thin and sealed tip. The thin and sealed EGT probe design is widely used for aircraft applicatio­n due to its durability. It is also very popular in Europe. The tip of this probe is made of Inconel 600 alloy that provides the highest working temperature available for this type of sensor. The diameter of the probe is optimized to balance the requirement of mechanical stability and the response time. The probe diameter is 3mm, with several mounting thread options available (choose from the drop down list). The insertion depth is adjustable with 1.34" (35mm) maximum.  The default cable length is 78” (2 meters). If you need a longer cable, please select the 4 meter cable option. The maximum working temperature of the sensor is 1100 ºC (2000 ºF).

TC-KEGTS

TC-KEGTS Adapter Options:

1/8NPT M8x1 M10x1 Weld-in SS 1/4NPT 1/4BSPT Weld-in Carbon

SYL-1813-MR Gauge Specifications:

Input type Temperature Sensor, K, E, S, R, J, T, B, WRe3-WRe25, Pt100, Cu50
Pressure transducer, 0-375 ohm, 0-5 V, 0-75 mV
Other transducer: 0-30 mV, 1-5 V, 0-10 V, 0-10 mA, 0-20 mA, 4-20 mA
Display One lines, Four digits. °F or °C, Bar, PSI, or user defined
Display resolution 1°C, 1°F
Display brightness control 12 V illumination control signal, or key pad
Accuracy ±0.2% or ±1 unit of full input range
Control mode On/Off
Control output Relay contact: 3A at 240VAC
Alarm Relay (3A rating) high/low alarm
Recording function Maximum, Max time, Minimum, Min time.
Recording time 100 hrs with 1 minute resolution.
Power consumption <2 Watt
Power supply voltage rating 12 (8.5~16.5) VDC 
Panel cutout dimension 52 mm diameter (2 1/16 inch)
Dimension 60 x 60 x 59 mm 

Click here for instruction manual.
Click here for EGT sensor installation guide.


This product was added to our catalog on Monday 18 April, 2016.

Copyright © 2024 auberins.com.