UL listed Illuminated Metal Push Button Switch, 110/220VAC, 16mm, Wiring Harness Included

Note: This combo listing include the switch and the wiring harness. For option "single item", you will receive one SW9-UL switch with one wiring harness. For option "lot of 10", you will receive 10 switches with 10 wiring harness. For option "lot of 100", you will receive 100 switches with 100 wiring harness. 

Two options are offered, maintained action and momentary action. The maintained push-button switch can be used to control the 120Vac power to devices such as controllers, buzzers, or small fans. The momentary push-button switch can be used as a start key or a reset key for timers. 

There are three poles on the switch for wiring a load. One is normally open pole, one is for normally closed pole, and the third pin is the common pole. 

Note 1: Wiring harness (wire connector) is included for this switch. 

Note 2: 3 weeks lead time may apply for 100 pcs order. For questions of our switches (different LED color, size, wholesale pricing, etc), feel free to contact us. 

Specifications

Note: the nut and the gasket should both be installed behind the panel.

Four LED colors (blue/green/red/white) to choose from.
Right: Maintained Action: ON position on the right, OFF position on the left
Dimensions (mm)
Typical wiring (110V LED): Turn indicator on when button is pressed	Indicator is always on