Temperature Probe Clip
Pclip

Temperature Probe Clip

This probe clip can be used to mount the temperature probe between the racks of a smoker. This probe clip fits our WS-SENSOR10A, WS-SENSOR15 and WS-SENSOR17. It can also fit third-party probes which have minimum...
$2.99
Add:
Snap-on Blower for Charcoal Smoker 6.5CFM
BL-6.5

Snap-on Blower for Charcoal Smoker 6.5CFM

This is a snap-on blower that can be installed on many smoker pits without using an adapter. The requirement is that the mounting hole should be less than 1.25 (32 mm) at the maximum dimension....
$51.95
... more info
Snap-on Blower for Charcoal Smoker 20 CFM
BL-20

Snap-on Blower for Charcoal Smoker 20 CFM

This is a snap-on blower that can be installed on many smoker pits without using an adapter.  The requirement is that the mounting hole should be less than 1.85 (48 mm) at the maximum...
$59.95
... more info
Snap-on Blower for Charcoal Smoker 10 CFM
BL-10

Snap-on Blower for Charcoal Smoker 10 CFM

This is a snap-on blower that can be installed on many smoker pits without using any adapters.  The requirement is that the mounting hole should be less than 1.85 (48 mm) at the maximum...
$59.95
... more info
Power cord w/ car charger plug
DCcord1

Power cord w/ car charger plug

This barrel connector power cord w/ car charger plug is for 12 Volt DC applications. It is compatible with SYL-1615 controller as well. Red LED "charging indicator" light will be lit when power is on.  ...
$11.95
... more info
Mounting Spring for 6.5/10/20 CFM Blower
ACC-MS

Mounting Spring for 6.5/10/20 CFM Blower

This is the spring for the snap-on blowers (6.5, 10, or 20 CFM blower). With the snap-on spring installed, the blower can be mounted on many smoker pits without using any adapter. The requirement is that the...
$1.80
Add:
Mounting Hanger Clips
Hclip

Mounting Hanger Clips

This hanger clips are used to mount our controllers to the wall, including SYL-3615, TH330A, etc.  A set of two clips & screws are included in this listing.  Specifications:  Material: Stainless Steel
$5.99
Add:
Meat sensor for SYL-2615 controller (Out of stock)
WS-SENSOR16

Meat sensor for SYL-2615 controller (Out of stock)

This product is upgraded to WS-SENSOR18A.

Call for Price
... more info
Call for price
Meat sensor for H series WSD controller
WS-SENSOR18A

Meat sensor for H series WSD controller

Replacement probe selection guide for electric smoker controller Note: This probe is compatible with AW-WST1510H-W / WST-1510H controller and SYL-2615/SYL-3615 controller. It is not compatible with C series...
$27.00
... more info
Maverick Food Probe (out of stock)
PR-001

Maverick Food Probe (out of stock)

This sensor is a thermistor with a pointed tip. It fits for our heatermeter controller and Maverick Thermistor ET-732/733/735/905.    Maximum working temperature: 370 °C (700 °F).   Cable: 6 ft (2...
$20.00
Add:
K Type Thermocouple w/ alligator clip, Smoker, High Precision
TC-K6A

K Type Thermocouple w/ alligator clip, Smoker, High Precision

This sensor is a K type thermocouple with an alligator clip on the tip and has a small thermal mass for faster responses in the air. It can be used for barbeque smokers, powder coating ovens and refrigerator...
$13.35
Add:
K type thermocouple 4"probe with Clip, Smoker, Oven
TC-K3MM-C

K type thermocouple 4"probe with Clip, Smoker, Oven

This K type thermocouple is suitable for smokers and low temperature oven (<900F) applications. The probe can be installed inside the grill or oven. It comes with an alligator clip for easy installation. It can be...
$20.97
Add:
Copyright © 2024 auberins.com.