(image for) Free hanging sensor for H series WSD controller
WS-SENSOR17

Free hanging sensor for H series WSD controller

  Replacement probe selection guide for electric smoker controller Note: This probe is compatible with WSD-1500H-W controller and SYL-2615/SYL-3615 controller. It is not compatible with C series controller like...
$27.00
Add:
(image for) Meat sensor for H series WSD controller
WS-SENSOR18A

Meat sensor for H series WSD controller

Replacement probe selection guide for electric smoker controller Note: This probe is compatible with AW-WST1510H-W / WST-1510H controller and SYL-2615/SYL-3615 controller. It is not compatible with C series...
$27.00
... more info
(image for) Smoker/BBQ Sensor, 6 in Probe, 1/2 NPT Thread
WS-SENSOR-L1501/2NPT

Smoker/BBQ Sensor, 6 in Probe, 1/2 NPT Thread

This is a probe that is designed to be used with Auber's H series electric smoker controllers (AW-1520H, WST-1520H, WSD-1500H, WSD-1500H-W, WS-1211H, WSD-1200H) and Auber's WiFi BBQ/grill controllers SYL-3615 and...
$34.00
Add:
(image for) 12V Power Adapter for Dewalt Battery Pack, with USB Port, 3A/12V
PA-DD1

12V Power Adapter for Dewalt Battery Pack, with USB Port, 3A/12V

New product update: 5A 12V adapter is released! Please see PA-DD2. This listing includes one 12V & 5V converter / charger for DeWalt® 20V Battery, DCB091 compatible, for Heated Jacket, Video Camera, BBQ...
$20.98
Add:
(image for) 12V Power Adapter for Dewalt Battery Pack, with USB Port, 5A/12V
PA-DD2

12V Power Adapter for Dewalt Battery Pack, with USB Port, 5A/12V

This listing includes one 12V & 5V converter / charger for DeWalt® 20V Battery, DCB091 compatible, for Heated Jacket, Video Camera, BBQ Smoker Controller. One 23" power cable is also included for...
$29.99
Add:
(image for) Gasket for 6.5 CFM Blower
ACC-G6

Gasket for 6.5 CFM Blower

This is a 4.5 mm thick silicone foam high temperature gasket designed for 6.5 CFM blowers. For smoker vents that have an uneven surface, apply this gasket between the blower and the vent in order to improve...
$3.00
Add:
(image for) Gasket for 10/20 CFM Blower
ACC-G20

Gasket for 10/20 CFM Blower

This is a 5 mm thick silicone foam high temperature gasket designed for 10/20 CFM blowers. For smoker vents that have an uneven surface, apply this gasket between the blower and the vent in order to improve...
$3.00
Add:
(image for) Temperature Probe Clip
Pclip

Temperature Probe Clip

This probe clip can be used to mount the temperature probe between the racks of a smoker. This probe clip fits our WS-SENSOR10A, WS-SENSOR15 and WS-SENSOR17. It can also fit third-party probes which have minimum...
$2.99
Add:
(image for) Mounting Hanger Clips
Hclip

Mounting Hanger Clips

This hanger clips are used to mount our controllers to the wall, including SYL-3615, TH330A, etc.  A set of two clips & screws are included in this listing.  Specifications:  Material: Stainless Steel
$5.99
Add:
(image for) Snap-on Blower for Charcoal Smoker 6.5CFM
BL-6.5

Snap-on Blower for Charcoal Smoker 6.5CFM

This is a snap-on blower that can be installed on many smoker pits without using an adapter. The requirement is that the mounting hole should be less than 1.25 (32 mm) at the maximum dimension....
$51.95
... more info
(image for) Snap-on Blower for Charcoal Smoker 10 CFM
BL-10

Snap-on Blower for Charcoal Smoker 10 CFM

This is a snap-on blower that can be installed on many smoker pits without using any adapters.  The requirement is that the mounting hole should be less than 1.85 (48 mm) at the maximum...
$59.95
... more info
(image for) Snap-on Blower for Charcoal Smoker 20 CFM
BL-20

Snap-on Blower for Charcoal Smoker 20 CFM

This is a snap-on blower that can be installed on many smoker pits without using an adapter.  The requirement is that the mounting hole should be less than 1.85 (48 mm) at the maximum...
$59.95
... more info

Featured Products - Accessories for Charcoal Smokers

Copyright © 2024 auberins.com.