1/16 DIN PID Temperature Controller w/ Ramp/soak, 12~24V AC/DC


  • Model: SYL-23X2P-24


    Please Choose:

Product Description:

Note: SYL-23X2P-24 is a low voltage version of SYL-23X2P, and it can only be powered by 12~24V AC/DC. For 110V/240V power supply version, please check SYL-23X2P.

This controller can be used to control external relay/contactor, solid state relay (SSR), or control a small AC load directly. Please check the details for “model selections” below, and choose the desired Controller Output Option accordingly. 

PID Temperature Controller with 30 Steps Ramp/Soak

This is a brand new, dual display, 1/16 DIN (48 x 48 mm) programmable PID temperature/process controller. This controller is for applications where it is desirable to have adjusted set point automatically over time. Up to 30 steps can be programmed to A) ramp the temperature up and down at controlled rate, B) maintain the temperature for a specific period time, C) turn on/off the relays (alarm relay) after process reach a specific step, D) jump (for loops), run, hold or stop after process reaches a specific step. 

This controller has all the features of the standard PID controller (except the manual control mode). The dual alarm relay can be activated either by the temperature set point or by program steps. And can be used to interlock other equipments in the process.

If you don't need the ramp/soak action, please see the other PID controllers without ramp/soak option.


  • 30 programmable steps for ramp, soak and other logic actions
  • PID control with fuzzy logic enhancement
  • Dual alarm outputs made standard at no extra charge
  • 0.2% accuracy over the entire input range
  • Displays in either Fahrenheit or Celsius temperature unit
  • Percent output indication
  • Selectable security access levels
  • High brightness, large LED display easily read from distance
  • Manual, technical support and 90-days warranty

Model Selection

We offer three models in this series: SYL-2342P-24, SYL-2352P-24, and SYL-2372P-24. Please read the description below to choose the correct model for your application. 

SYL-2342P-24 (relay/contactor output)

This model has built-in relay can handle 10 A of current at 120VAC. That means 1200 watts of load can be connected directly to the controller without the need of an external relay or SSR. That is a very convenient for applications in which only a small heater is used. It can also be used to drive external relays or contactors.  It supports 17 different types of input devices that can be set by the user from keypad.

SYL-2352P-24 (SSR output)

This model has 12 VDC output for controlling external solid state relays (SSR).

SYL-2372P-24 (built-in SSR output)

Originally designed for the Traeger control. This unit has a built-in zero-crossing solid state relay (SSR) that can handle 2 Amp of load. The zero-crossing switching feature will avoid the noise caused by inductive load. It makes the controller more stable than the controller with relay contact output (SYL-2342-24) when switching inductive loads such as a contractors, solenoid valves, or small motors. Please note that the build-in SSR can only drive AC loads; it can NOT drive DC loads or DC signal triggered AC SSRs. It can NOT handle more than 300W loads (at 110VAC) either. 

Main Specifications

  SYL-2342P-24 SYL-2352P-24 SYL-2372P-24
Input type TC: K, E, S, WRe, J, T, B, N
RTD: Pt100, Cu50, 0-80 ohm, 0-400 ohm.
DC voltage: 0~20 mV, 0-100 mv, 0~5V, 1~5V, 0~1V, -100~100mV, -20~20mV, -5~5V, 0.2~1V.
DC current: 4~20mA.
Input range K (-60~2300ºF), S (-60~3100ºF), WRe (32~4150ºF), T (-330~660ºF), E (32~1500ºF),
J (32~1800ºF), B (32~3300ºF), N (32~2400ºF)Pt100 (-320~1100ºF), Cu50 (-60~300ºF)
Linear input: -1999~+9999 defined by user
Display Two lines, Four digits. °F or °C.
Display Resolution 1°C and 0.1 °C. or 1°F
Accuracy ±0.2% or ±1 unit of full input range
Control mode Fuzzy PID, On-Off
Output mode Relay w/ NO and NC
contacts: 7A at 240VAC,
10A at 120VAC, or 10A at 24VDC
12 VDC for external SSR control Built-in 2A SSR with zero-
crossing switching 20-240VAC
Alarm Process high/low alarm, deviation high/low alarm
Alarm output Relay contact (Resistive): 1A at 240VAC, 3A at120VAC, or 3A at 24VDC
Power supply
voltage rating
12~24V AC/DC
Dimension 1.89 x 1.89 x 3.88", or 48 x 48 x 100 mm (1/16 DIN)

Default setting

Input sensor: K type thermocouple (sensor not included)
Display Unit: Fahrenheit (°F)
Display resolution: 1 degree
Alarm 1: Deviation low
Alarm 2: Deviation high

Click the link below to download the instruction manual:
SYL-2342P (85~264V AC): Manual
SYL-2352P (85~264V AC): Manual
SYL-2372P (85~264V AC): Manual
Quick list of key function

This product was added to our catalog on Tuesday 31 May, 2016.

Copyright © 2018 auberins.com. Contact sales@auberins.com