The CP30 is a 240V control panel with up to 30 Amps output capability. It has multiple controller options and can work for a variety of applicaiton, such as smokers, powder coating ovens, mushroom substrate sterilizers, etc. See features below.
Features:
- Enclosure with 1/2" Knockouts for easy connection.
- Controller with either PID algorithm or artificial intelligence algorithm.
- Two line display that shows both the set temperature and actual monitoring temperature.
- Displays temperature in either Fahrenheit or Celsius.
- Mini 2-in-1 Volt and Amp meter for displaying system power level.
- Solid State Relay (SSR) for long lasting, fast and noise free power switching.
- Contactor for completely cut off power to the element.
- Strain-relief power cord connector for hard-wiring the power line.
- Assembled in U.S.
Controller module options:
- Standard single set point general-purpose PID: SYL-2352
- Ramp & Soak PID: SYL-2352P
- PID controller with built-in timer: SWA-2451B
- Basic mash & boil EZboil® controller: DSPR120
- Advanced step mashing EZboil® controller: DSPR320A
- Bluetooth advanced LCD PID controller: N20K48
- WiFi PID controller: AW-SYL-2352
Sensor connection options:
Default sensor connection option is hardwiring. If you need a detachable receptacle for the sensor, please select the right type. No sensor nor sensor cable is included with this panel.
Power input & output connection options:
By default, power input & output cords need to be hardwired into this control panel. If you need a power output socket instead, please
contact us.
Bottom View (sensor option: hardwiring)
Bottom View (sensor option: thermocouple)
Bottom View (sensor option: RTD)
Side View
Note:
1. The control panel is designed for 240V single phase power. Please verify your power supply before purchase. Input power cord is not included.
2. Environment humidity is less than 85% RH.
3. This control system is designed for heating elements (resistive load) only, not for valve or other types of load. Heating element is not included.
4. Sensor is not included.
5. If you need buzzer and alarm control, please see our PCO102 for K thermocouple and STL102 for PT100 RTD sensor.
6. Warranty: One (1) year limited warranty.
7. Lead time for this product is 2-3 business days. Please contact us if you have any other questions.
This product was added to our catalog on Tuesday 21 September, 2021.
