Wireless Thermometer for Stove Pipe,Chimney,Outdoor Wood Boiler

Starting at: $131.50

  • Model: AT210-COMBO


    Please Choose:

Product Description:

Product update: Magnet probe option is currently out of stock. 

This is a wireless thermometer with two display units. It can be used to remotely monitor the temperature of a stove pipe, a chimney in a multi-story home or outdoor wood boiler. For stove/chimney, the wireless feature provides you the ability to monitor the stove temperature remotely. You can place the sending unit near the stove in the basement and the monitoring unit upstairs.

For outdoor wood boiler, the wireless feature provides you the ability to monitor the boiler's water temperature remotely. You can attach the probe to the boiler water line to monitor the temperature of the water. Both units have the temperature display and alarm buzzer. The wireless unit eliminates the need for a long sensor cable that is difficult to install and less reliable.  It also allows you to read the temperature either by the stove/wood boiler, or remotely.

One display unit is the master unit (AT210-B), can monitor temperature reading from one or up to 10 slave units (AT210-A). The other unit (AT210-A) should be placed on-site where the stove is located. This unit has a port to take input signal from the temperature probe. There is also a 12VDC output port to power external buzzer. There are two buzzers: one is built in the meter, and the other one is an optional external buzzer. The two buzzers are synchronized. The meter contains two alarm settings for the buzzer. One alarm can be used for high limit alarm and other can be used for low fuel alarm.  The external buzzer can be placed at different floor from where the stove is located.  The gauge is powered by 12V DC through an AC adapter (included) for continuous operation. It can also be powered by car battery. 

Note: For extra slave/master unit, you can order it here.

Wireless thermometer (AT210-Combo) with power supply, a buzzer (optional), and a washer sensor.

Included in the package:
1 x Master unit (AT210-B)
1 x Slave unit (AT210-A)
2 x AC to 12VDC adapter. The cable length for power adapter is 3 ft.
1 x type K thermocouple temperature sensor (select appropriate model in the sensor option)

Three probe options are available:
1). The washer sensor (TC-K-WS) is suitable for single wall pipes. It can be mounted on the surface of the pipe or stove with a #6 screw. Maximum temperature 1650ºF.
2). The 4" (100 mm) probe (TC-K-BR) with mounting bracket can be used on double wall pipes. User needs to drill a 1/8" hole to insert the probe. Maximum temperature 1650ºF.
3). The magnet probe (TC-K-MAG) can be attached to iron or steel pipes or walls. If the temperature is beyond this limit, the magnets may lose some of its holding force. Maximum temperature 750ºF.
Washer Sensor for Single Wall (TC-K-WS) Sensor with Bracket for Double Wall (TC-K-BR)
Magnet Probe for Surface Temperature Such as Cast Iron Stove (TC-K-MAG).

Probe Specifications:
  Washer Sensor 
Double Wall Sensor
Magnetic Sensor
Temperature Range 1650ºF (900ºC) 1650ºF (900ºC) 750ºF (400ºC)
Accuracy +/-5ºF
Cable Insulation Fiberglass with stainless steel over braid.
Cable Working Temperature 900ºF
Cable Length 6 ft (2 m), 13 ft (5 m), or 33 ft (10 m)
The external buzzer can be placed in a room that is different from where the stove is located. Two buzzer options are provided:
1). Panel mount flashing buzzer (FLBuz-12). It will flash red light with buzzing sound.
2). Wall mount Piezo buzzer (PZBuz). It can be screw-mounted or stuck to the wall. The piezo buzzer gives no light, but it has a very loud buzzing sound (about the same level as the smoke alarm). Please pay attention to the polarity of the Piezo Buzzer. If connected incorrectly, this buzzer won't work.
The cable length of the external flashing buzzer is 6 ft. It can be extended to more than 100 ft with two conductor cable. The cable length of the piezo buzzer is 6 ft. It can also be extended by two conductor cable.
FLBuz-12 Piezo buzzer
  Internal Buzzer Flashing Buzzer
Piezo Buzzer 
Alarming Method Sound Sound & flashing Light Sound
Decibel Rating
(tested 10 cm away)
85 dB 85 dB 88 dB
Cable Length NA 6 ft 6 ft
Display unit can be set to either Celsius or Fahrenheit.
Temperature range (With K type thermocouple) : -320 ºF-1650 ºF. (Higher temperature probe is available upon request)
Accuracy: +/-5 ºF over the entire range.

Click here for instruction manual.
Click here for common errors.

One (1) year for the thermometer, three (3) months for the sensor.

Current Reviews: 1

This product was added to our catalog on Tuesday 05 August, 2014.

Copyright © 2018 auberins.com. Contact sales@auberins.com