Humidity Sensor

Starting at: $15.00

  • Model: HSR-TH102


    Please Choose:

Product Description:

This sensor can be used with Auber Humidity Controllers (TH102) to measure the relative humidity.

For sensor cable option, please check the serial number on your TH102 controller. If your serial number is starting at 1304 or less, this sensor cable may not fit and please contact us separately.


Power: 3.3 - 5.2V DC
Humidity range: 0 - 99.9% RH
Temperature range: -40 - +80 ºC
Precision: 3%RH, 0.5 ºC
Sensor Dimension: 2.09'' x 1.04'' x 0.52''

Cable Length: 6 ft (2m)

For users of Auber TH102 humidity controllers, if you want to buy a replacement sensor without a cable, you need to check the series number on the controller first. The first two digits in the series number represent year, the 3rd and 4th digits represent month, and the rest of digits are the batch series number. For sensors bearing series number greater than 1306xxx, the cable is connected to the sensor unit through a connector. In this case, you can buy the sensor unit alone and use your old cable. For users who have the series number between 1304xxx and 1306xxx, the cable wire is welded to the sensor unit. We don't sell this type of sensor unit alone. For users that have series number earlier than 1304030, you need to call us for the correct replacement sensor.

An easy way to identify whether the sensor unit is connected to cable through a connector is to look for a white piece of plastic inside the sensor (see the area highlighted by red in the Figure below). You can easily see the white piece if your sensor has a cable connector.

The disassembled humidity sensor is shown in the picture below. 

Warranty: 90 days

This product was added to our catalog on Thursday 31 October, 2013.

Copyright © 2018 Contact