WIFI Temp & Humidity Controller for Curing Fridge, Lot of 2

This listing includes two sets of AW-TH330A wireless temp & humidity controller. By using two AW-TH330A controllers, you can control two temperature devices (one cooler and one heater) and two humidity devices (one humidifier and one dehumidifier) at same time. 

This AW-TH330A plug-n-play temperature and humidity controller with Wi-Fi can be used for sausage curing, green houses, incubator and other similar applications, controlling both temperature (heating OR cooling) and humidity (humidifying OR dehumidifying) at the same time. You only need to plug in the power cord plugs from your heater/cooler and/or humidifier/dehumidifier directly to the outlets on the controller.

The controller has a two-line LED display, two output sockets, one sensor module and one input power cord. The top displays the measured temperature value (either in Celsius or Fahrenheit), and the bottom shows the measured humidity value (RH%). The left output socket connects to the heating/cooling devices while the right output socket is for a humidifier/dehumidifier. The sensor module contains both temperature and humidity sensors (2-in-1 sensor).

This controller can be used in high relative humidity (>85%) and condensing environments, which are among the most challenging conditions for humidity controllers. For example, when controlling the humidity of a curing fridge at temperatures below the dew point of the ambient environment, opening the fridge door will cause water to condense onto the sensor. Also, when controlling the humidity at a humidity level that is close to 100%, slight temperature drop may cause condensation on the sensor.  As a result, this will usually lead to unstable readings on humidity sensors while also potentially damaging the sensor. The AW-TH330A, however, is equipped with the utmost robust sensor available on the market that is able to withstand such situations. 

Exclusive features:
New humidity control parameters are introduced to limit the humidity output. In controlling curing chambers, there typically is a significant decrease in relative humidity whenever the compressor is running, or a large increase when the chamber door is opened. Humidity controllers on the market typically enable the humidity output immediately, which will create a big reading swing. However, with new humidity controller parameters in this controller, users are able to limit the humidity output to reduce reading swings. These parameters can be accessed directly through the controller’s keypad.

WIFI Function:
The app based control feature gives a sense that your controller is always in your pocket. And now, it's easier than ever to control all the features remotely and directly on the AuberWIFI app from your smart device. (As a good analogy, the difference between the web and app based interface is just like the experiences of finding the local weather information by using a weather app or by browsing the weather.com). Such advantages of using app based control include:

1) Remote access. Using the AuberWIFI app, you are able to check/change the temperature/humidity set points and all the parameters at any time from anywhere, as long as you are connected to a cellular or WIFI internet. You will be able to monitor the device when you are not near the controller. 

2) Easy to view and analyze performance. Our app offers graphic plots to show the temperature and humidity data over the time. You can also export the data to a CSV file for further analysis.
 
3) User-Friendly interface. Setting up control parameters through your smartphone is an easier and quicker alternative than the traditional keypad. Through the keypad and two-line display, you may need to refer to its manual to recheck the parameters from time to time again. But with the innovative AuberWIFI app, the function and setting range of each parameter will be denoted on the screen to save the hassle of maneuvering the device. 

4) An integrated solution. The AuberWIFI app gives the user a sense that their phones are integrated as a part of their controller. The system has more functions and is easier to operate.  Moreover, you can manage multiple devices from the Auber WIFI Device family just with a few clicks. Instead of using one app for only one device model, our smart phone app acts as the central control hub for different types of AuberWIFI devices, giving you a better user experience than web based interfaces of other Wi-Fi enabled devices.

Left: The main screen in the AuberWIFI App.
Right: Data plots of temperature in the 123 past 2h and the humidity in the past 24h.
 

Left: Screen shot of the Parameter Setting page. Every parameter name is followed by its definition.
Right: Three devices are monitored by the phone at the same time.

Specifications

Warranty: 1 year for the controller; 90 days for sensor

Note:

• The controller can display the temperature unit in Celsius or Fahrenheit.
• Unlike the PID controllers we sell, this on/off controller will not hold the temperature as tight if the system has very slow and delayed response. Some temperature overshot is normal.
• Although both temperature and humidity output can handle up to 15A of power,  the combined total power of the two channels are limited to 15A due to the limitation of input power cord.
• For AW-TH330A, the input power plug is a US NEMA 5-15P plug. The output power plug is a US NEMA 5-15R socket. 
• This listing includes two pcs of 6 ft (2 m) sensor cable. Two pcs of 20 ft (6 m) sensor cable option is also available. Each controller requires one sensor & sensor cable. You cannot use two controllers with the same sensor. 
• Refurbished TH220-W is limited in stock here. 

Side panel. The bottom left is the power input plug (5-15P).	Back panel.

Manuals:
Instruction manual
Click here for App guide (AuberWifi)
Android App (AuberWifi)
iPhone App (AuberWifi) 
[Tutorial Video] Quick guide to factory reset the controller

Keywords: curing controller, environmental controller