Box B404020 with scatches & dents. Two options are available for this listing. For option "w/ top cover plate, no heat sink", you will get a large plate to cover the top hole of this enclosure. For option "With 80A Heatsink (BHS80A)", you will get a heat sink and a plate adapter. So you can mount this heat sink to the top hole of this enclosure with this adapter plate.
Pictures are available upon request (link).
Original description:
This controller enclosure measures 16" x16" x 8" (400 x 400 x 200 mm). Four 1/16 DIN sized controllers or timers can be installed with adequate room for wiring and switching device. This box is made of powder coated, 0.060" (1.5 mm) thick steel (rated as NEMA 4), which is available in a beige color.
The door comes with a lock and key. The hinges of the door are removable. It can be installed on either right or left side. Gasket and plugs are provided. The enclosure is designed to be mounted on a wall. You can directly mount it with screws or hang it on the wall with the hangers (included).
An external mounted heat sink option for 80 Amp is offered. The heat sink comes with pre-drilled and tapped mounting holes for SSR mounting. Up to 3 SSRs can be mounted. This externally mounted heat sink eliminates the venting requirement of the enclosure for internally mounted heat sink. The dimension for the heat sink is 135mm x 250mm x 30mm (5.3" x 9.9" x 1.2").
 |
 |
| Beige finish |
Internal view (beige) |
 |
 |
| Original heat sink cover plate (beige) |
Top: Adapter plate for 80A heat sink.
Bottom: Original coverplate. |
Part list:
Enclosure: 1 pc
80A heat sink (Optional): 1 pc
Heat sink cover plate (Original / Precut): 1 pc
Screws for heat sink cover: 10 pcs
Soft caps: 6 pcs
Grounding sticker: 1 pc
Hanger: 4 pcs
Hanger screw and nut: 4 sets
This product was added to our catalog on Wednesday 16 June, 2021.
