The MS100 is a 30A heat control panel for your mushroom substrate sterilizer. This enhanced PID controller has a built-in timer feature, which can turn off the heater after a specific hold time. This panel is designed to handle up to 30A or 7200W/240V element(s). For example, it can drive one 5000W/240V heater, or two 3000W/240V heaters.
Features:
- One powder coated wall-mount enclosure with knockouts is included.
- Dual-line display PID controller with built-in timer feature.
- Illuminated 22mm blue reset button for intuitive operation.
- Flashing buzzer and alarm mute switch.
- Mini 2-in-1 Volt and Amp meter to show system power.
- Solid State Relay for precise temperature control.
- Use a contactor to completely shut off power to the element.
- Strain relief power cord connector for hard-wiring the power line.
- PT100 Liquid tight RTD sensor with 12-ft silicone braided cable.
- 240V 30A NEMA L6-30R socket for heater connection.
- Breaker switch for overload protection
- DIN Rail and DIN Rail Terminal Blocks for power distribution.
The MS100 is built with some of the most popular products Auber Instruments has to offer. With the SWA-2451B PID temperature controller with timer, you can take in the enjoyment of growing mushroom substrate while also skipping the tedious parts by automating the heating process. For instance, this operator can heat up and hold at 140ºF for 480 minutes (8 hours). Once the timer finishes counting to 480 minutes, the buzzer will be triggered, and the system will send a notification. After that, the user can simply press the blue reset button to start another batch.
A PT100 RTD probe is offered with the listing and should be installed at the boiler. Seven tri-clamp probe options are available. Please leave a note for the tri-clamp probe# you need.
| Tri-clamp Probe# |
Part# |
Flange OD |
Probe Length |
| 1 |
PT100-C |
1.988” (50.5mm) |
1.58” (40mm) |
| 2 |
PT100-C |
1.988” (50.5mm) |
2.36” (60mm) |
| 3 |
PT100-C |
1.988” (50.5mm) |
6” (150mm) |
| 4 |
PT100-C |
1.988” (50.5mm) |
8” (200mm) |
| 5 |
PT100-C-2 |
2.52” (64mm) |
2.36” (60mm) |
| 6 |
PT100-C-2 |
2.52” (64mm) |
6” (150mm) |
| 7 |
PT100-C-2 |
2.52” (64mm) |
8” (200mm) |
Three color options for the silicone braided cable: red, black, blue and yellow.
Note:
- This panel is designed for North America 240V AC power lines that require four lines power connection (L1, L2, Neutral and Ground).
- Input power cord (SOOW 10/4) is not included because each user may have different hook up requirements.
- The heating element is not included.
- Lead time is about 2-3 business days.
Warranty: One-year limited warranty. Please see here for details.
Front View
Bottom View
This product was added to our catalog on Tuesday 05 January, 2021.
