Kiln Controller Kit ( 240V 30A 7200W)

Starting at: $290.00

  • Model: KIT-KLN


    Please Choose:

    Output Connector Option


    Manual Option

Product Description:


This is a kit to DIY your electric kiln system. The circuit is designed for a 240 V system no more than 30 Amps. If you have one 5000-Watt heater or two 3000-Watt heater, this is the right choice. In addition to a programmable controller, it also has a flashing buzzer for high temperature alarm and indicator for showing heater status. Wiring diagram and punching specification are available after purchase.
This kit includes each of the following:
  • 10x8x6" Wall mount enclosure with hanger and 40 A heat sink.
  • Dual-line display PID controller with programmable capability.
  • 40 A Solid State Relay.
  • Flashing Buzzer for temperature/timer alarm.
  • Yellow LED for indicating heater status.
  • Red illuminated selector switch for alarm silence.
  • Yellow illuminated selector switch for element control.
  • Blue illuminated maintained push-button for power ON/OFF.
  • High-temp K Type Thermocouple (max working temperature is 2300 º F) w/ ceramic mounting plate.
  • Leviton 240 V 30 A NEMA L6-30R Socket for heater connection.
  • 30 A Strain Relief Power Cord Connector for hard-wiring the power line. 
  • 3 pole 120V Coil contactor.
  • Engraved Panel Tags for labeling.
The kit does not include:
  • Heating element.
  • Input power cord, 4 conductor (10/4).
  • Wiring and wiring fittings.
  • The enclosure only has one precut for 1/16 DIN controller on the front panel.
  • If you want the kit with an additional thermometer, please contact us

Warranty: 6 months.

A sample look of an assembled unit:

Front View

Bottom View 

This product was added to our catalog on Monday 10 July, 2017.

Copyright © 2018 Contact