Home Brew Control Panel ( 240V AC, 30 Amp, 7200 Watt)

Starting at: $785.00

  • Model: BB100


    Please Choose:

    RTD Probe Option:

    Power Input Option

Product Description:

This is a full-function control panel for home beer brewing, which can maximize the brewing quality and minimize your time, resources and effort spent on building a brew system. With the help of this small control box, all-grain brewing at home is made easier and simpler. 

  • A PID controlled output for heater that can run up to 7200 Watt (at 240 VAC). The temperature controller offers both PID mode (for mashing) and manual mode (for wort boiling).
  • A multi-event timer that can be used either for counting mashing time, or for adding hops at different time point during wort boiling.
  • Two independently controlled 120V outlets for pumps. One is for water pump and the other one is for wort pump.
  • Inter-locked switching system that reduced the chance of accidentally turning on the system when system is not ready.
  • Independent circuit breakers for both 240V and 120V circuits.
  • Independent contactors for each input and output port for extra safety protection.
  • A RTD temperature probe that provides a more accurate reading of the system.
  • Illuminated 22 mm switches for ease of operating.
  • Black powder coated wall-mount enclosure with hangers.
Detailed Descriptions
This panel is built with some of the most popular components offered by Auber Instruments to the beer brewing community. The default controller is the SYL-2352. It is a fuzzy logic controller that produce a very stable temperature control for mashing. And it also has a manual mode for controlling the wort boil. User can adjust the output power instead of temperature so that the wort boil will be controlled without boiling over. You can upgrade the built-in controller to EZboil® DSPR300 or DSPR400. DSPR300 is a digital power regulator designed to automate the liquid boiling process. It has two control modes: Mashing and boiling. In the mashing mode, the controller will function as temperature controller instead of power regulator. It can control the mashing as good as the SYL-2352 (but easier to use) without tuning. In the boiling mode, it can bring the liquid to boil in the maximum speed; then automatically reduce the power to maintain the boil at a desired level. It can do better job than SYL-2352 for boiling. Timer function is available for these two modes. After maintaining at boiling/mashing for a predetermined time, it can shut off the power. DSPR400 is a controller for automating the distillation process. It offers 0.1-degree resolution which is important for the distillation application. It can bring the liquid to the boil point in the maximum speed; then automatically reduce the power to maintain the boil at a desired level; It has a programmable alarm that can be used to notify the operator to remove the foreshots/heads at specific temperature. It also stops the distillation automatically so that the feints/tails will not be collected. The criterial for stopping the distillation can be either a preset temperature, or a preset distillation time. 

The individual timer used is the JSL-73B, multi-events timer, specifically designed for wort boiling. User can easily program the time for each ingredients in the recipe.  The timer and temperature alarm are connected to a flashing buzzer that will beep and flash with temperature reaches to the target, is too high, or time is up. User can hear from it easily within a distance of 30-50 ft. Mute switches on the panel allow the operator to easily disable the buzzer when needed. Industrial standard 22 mm illuminated switches are used. They are more reliable than the switches used for consumer product. The illuminated switches (with different colors) allow the operator quickly identify the status of the control panel. The panel also has a heater power indicator to give a positive confirmation that heater is being powered. The keyed power switch will lock the power to prevent unauthorized power up of the system. The panel also has two switchable 120VAC outputs for circulation pump or chiller pump.
To prevent running the heater dry or spray the water all over the place, the pump control switches and heater switch are interlocked with the main power switch. Operator will not be able to power up the system unless the pump and heater are at off position. Two double poles 32 Amp contactors are used for control the input and output port for added safety on North American 240VAC power line.  They will cut both the L1 and L2 lines when turned off. The input contactor will make the internal of control panel safe when it is being opened and serviced. The output controller will make the output port safe to touch when heater switches is turned off. Both the 240V AC for heater and 120VAC for pumps are protected by separate circuit breakers. If the heater or pump fails in short, these circuit breaker will trip and shut of the heater to prevent further damage.

One PT100 type RTD probe with 8’ braided cable is included in the package. Please select the model number of your preferred probe in the “RTD Probe Option”. If you want to install the probe on the wall of the tank, the 2 inch long, weldless fitting probe, PT100-L50M14, is the most common one to use.  If you want to insert the probe in the circulation through a Tee connection, the 1.5 inch long, with ½ NPT thread mounting, PT100-L401/2NPT, is the most common probe to use.  For RIMS system, the 6" probe, PT100-L1501/2NPT, can be used. Seven tri-clamp probe options are available. Please leave a note for the tri-clamp probe# you need. 
Tri-clamp Probe# Part# Flange OD Probe Length
1 PT100-C 1.988” (50.5mm) 1.38” (35mm)
2 PT100-C 1.988” (50.5mm) 2.36” (60mm)
3 PT100-C 1.988” (50.5mm) 6” (150mm)
4 PT100-C 1.988” (50.5mm) 8” (200mm)
5 PT100-C-2 2.52” (64mm) 2.36” (60mm)
6 PT100-C-2 2.52” (64mm) 6” (150mm)
7 PT100-C-2 2.52” (64mm) 8” (200mm)
          Heater Control Output            30A, 240VAC maximum. NEMA L6-30 Connector.
Pump Control Output 10A, 120VAC maximum. NEMA 5-15R socket.
Input Connection 30A, four conductors. L14-30R Connector.
Sensor  Pt100 RTD sensor, XLR connector.
Circuit Breaker 32A 2-pole and 10A 1-pole. UL 1077 rated.
Temperature Controller Auber SYL-2352/DSPR300/DSPR400
Timer Auber JSL-73B
Dimension (W x H x D) 12 x 10 x 8 inch (30 x 25 x 20 cm) 
Weight 13.55 lb (6.14 kg)
Warranty One (1) year for parts and labor


1) This system is designed for North America AC power line that requires a four lines power connection (L1, L2, N and G). All the input/output connections are NEMA standard type.

2) Although the system is protected circuit breaker, it is recommended that to hook up this system with a GFCI or Earth Leak protector protected power line because water is involved in the brewing equipment.

3) We also sell the parts (without wiring for this control panel). The kit of parts can be found at here.

4) Input power cord is not included because each user may have different hook up requirement in terms of cable length and connection type. The input power connector is listed as option.

5) This panel uses NEMA L14-30P receptacle as its power inlet. To power this panel, a power cord with NEMA L14-30R connector is required (to match L14-30P receptacle). We offer L14-30R connector as an option. 

6) There is a 3-5 days lead time for this product. Please contact us if you have any questions.

Figure 1. Front View of the Control Panel.

Figure 2. Bottom View of the Control Panel.

Please click here to download the manual for BB100. 

This product was added to our catalog on Wednesday 14 October, 2015.

Copyright © 2018 auberins.com. Contact sales@auberins.com