All-In-One BIAB Kit (240V 30A 7200W)

Starting at: $370.00

  • Model: KIT-BREW


    Please Choose:

    RTD Probe Option:

    Output Connector Option


    Manual Option

Product Description:

This is a kit to DIY your ALL-IN-ONE BIAB (Brew-In-A-Bag) control panel. The circuit is designed for 240 VAC 30 A heating element with two 120V outlets for water and wort pumps. The EZboil® step mashing controller (DSPR310) has all the features you need to enjoy a wonderful brew day: step mashing mode, a multi-events timer mode to help brewers track duration of the whole boiling process and built-in relays to be synchronized with either mashing or boiling steps. 

Two enclosure precut options are offered: 1) Complete precut enclosure. It has all the precuts on the front and bottom panels. 2) Enclosure with only one 1/16 DIN precut on the front panel.

Wiring diagram is available after purchase. 

Seven tri-clamp probe options are available. Please leave a note for the tri-clamp probe# you need. 
Tri-clamp Probe# Part# Flange OD Probe Length
1 PT100-C 1.988” (50.5mm) 1.38” (35mm)
2 PT100-C 1.988” (50.5mm) 2.36” (60mm)
3 PT100-C 1.988” (50.5mm) 6” (150mm)
4 PT100-C 1.988” (50.5mm) 8” (200mm)
5 PT100-C-2 2.52” (64mm) 2.36” (60mm)
6 PT100-C-2 2.52” (64mm) 6” (150mm)
7 PT100-C-2 2.52” (64mm) 8” (200mm)
This kit includes each of the following:
  • 10 x 8 x 6" wall-mount enclosure,  a heat sink and a set of hangers. 
  • A DSPR310 EZboil® controller.
  • A Solid State Relay.
  • 2 Pole 32A 110 DIN Rail Mounted Contactor.
  • A RTD temperature probe with 8 ft braided cable that provides a more accurate reading of the system. (For tri-clamp probe option, please leave a note for the part number and probe length option during checkout.)
  • A non-illuminated 22 mm selector switch for element control.
  • A non-illuminated 22 mm selector switch for alarm control.
  • Two Illuminated 22 mm push-button switches for water pump and wort pump.
  • Key selector switch for power control. 
  • Yellow LED for indicating element status. 
  • Flashing Buzzer for alarm. 
  • DIN Rail and a set if DIN Rail terminal blocks.
  • NEMA L6-30R Socket for output heater.
  • Strain Relief Power Cord Grip for hard-wiring the power line.
  • Engraved panel tags.
We are now offering the enclosure with complete cutout:
                                Front View.                                                                              Bottom View.
The kit does not include:
  • Heating element.
  • Input power cord, 4 conductor (10/4).
  • Wiring and wiring fittings.
1) This kit is designed for North America AC power line that requires a four lines power connection (L1, L2, N and G). The heater output connection is NEMA standard type.
2) It is recommended that to hook up this system with a GFCI or Earth Leak protector protected power line because water is involved in the brewing equipment.
3) Wires are not included in the kit. 
4) If you need 120V BIAB kit, please contact us

Warranty: 6 months.

Final look of an assembled unit:

Front View

Bottom View 

This product was added to our catalog on Monday 10 July, 2017.

Copyright © 2018 Contact