Powder Coating Oven Controller Kit w/ Light&Fan Control (12000W)

Starting at: $518.00

  • Model: KIT-PCO2-LF


    Please Choose:

    Output Connector Option


    Manual Option

Product Description:

This is our standard 50A KIT to DIY your control panel for powder coating oven w/ light and fan installed. It has a PID controller and an independent timer, so that it can show set temp, run temp, set time and run time at the same time. The dual-channel output design adds more flexibility on your oven element control; one can simply turn one channel OFF if you just want to run half power. The alarm buzzer can be used for both temp alarm and finishing alarm. Wiring diagram and punching specification are available after purchase.
Two enclosure precut options are offered: 1) Complete precut enclosure. It has all the precuts on the front, bottom and right panels. 2) Enclosure with only two 1/16 DIN precuts on the front panel.
If you do not need the light & fan control, please go to KIT-PCO2
This kit includes each of the following:
  • 12x10x8" Wall mount enclosure with hanger and 60A heat sink.
  • Dual-line display PID controller w/ connection to the timer.
  • Two pieces of 40 A Solid State Relay, each for one heater channel.
  • Dual-Line general purpose timer.
  • Flashing Buzzer  and alarm indicator.
  • Yellow LED for showing heater status.
  • Red illuminated selector switch for timer alarm silence.
  • Red illuminated selector switch for temperature alarm silence.
  • Two yellow illuminated selector switches for element control.
  • Blue illuminated selector switch for reseting timer.
  • Green illuminated selector switch for light and fan control.
  • Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
  • Leviton 240 V 30 A NEMA L6-30R Socket for each heater channel.
  • NEMA 5-15R 120V 15A Panel Mount Socket for hard-wiring the power line.
  • Strain Relief Power Cord Connector for hard-wiring the power line. 
  • Breaker Switch for main power control.
  • DIN Rail Terminal Block Kit for power system building.
  • Engraved Panel Tags for labeling. 
The kit does not include:
  • Heating element.
  • Input power cord.
  • Wiring and wiring fittings.
  • The enclosure only has two 1/16 DIN precut on the front panel.
  • If you need the KIT for gas oven, please contact us

Warranty: 6 months.

A sample look of a complete project is below:

Front View

Bottom View

This product was added to our catalog on Wednesday 28 June, 2017.

Copyright © 2018 auberins.com. Contact sales@auberins.com