This 4 bar MAP sensor offers a linear output in the 0.1 to 4.0 bar range (absolute pressure unit). When used as a boost pressure sensor, it can measure from -0.9 to 3.0 bar ( -26 inHg vacuum to 43 PSI boost) (relative pressure, or gauge pressure unit).
The sensor incorporates the latest MEMS technology and custom Application Specific Integrated Circuit (ASIC) technology. It is specifically designed for tough automotive applications and performance in harsh underhood environments such as extreme temperatures, vibrations, thermal and mechanical shock and corrosive chemicals.
Specifictions:
Electrical:
| Supply Voltage |
5.0±0.5 VDC |
| Supply Current |
10 mA max |
| Maximum Output Current Sink |
1 mA |
| Source |
0.1 mA |
| Output Impedance |
10 ohms max |
| Output Type |
ratiometric |
| Output Voltage |
0.62 to 4.81 VDC at 5VDC excitation |
Sensor Operating Characteristics:
| Pressure Range |
0.1 to 4.0 bar (or 1.5 to 58PSI) absolute |
| Proof Pressure |
200%FS |
| Static Accuracy (%FS) |
1.5 typ |
Environmental Effects:
| Compensated Temperature Range |
-40°C to +135°C |
| Storage Temperature Range |
-50°C to +165°C |
Mechanical:
Barb fitting ID: 0.25 inch
Media Compatibility Media Compatible with Silicone
Notes: Static accuracy is the RSS of non-linearity, hysteresis, and non-repeatability
This sensor is offered in two formats. The standard version comes with an unassembled the connector. Users can put their wire directly into the connector instead of splicing their wire to a short pig-tail. The second version comes with a connector that has 2 meters (6.5ft) of automotive grade cable installed (as shown in the picture). The price is $3.50 more. Please make the selection above.
Click here to download instruction manual
Click here for the installation guide
This product was added to our catalog on Friday 18 December, 2009.
