Digital Dual Channel Gauge Set with Two EGT Probes

Starting at: $152.95

  • Model: Combo-2EGT


    Please Choose:

Product Description:

This set includes one dual channel automobile multimeter (SYL-2813), two EGT probe with exposed tip (TC-KEGT). Please contact us if any questions. 

Red/Red Green/Green White/White

SYL-2813 gauge: 
This dual channel automobile multimeter can measure and display two parameters at the same time. It can measure temperature, pressure and other important parameters such as battery voltage and air/fuel ratio. Two programmable alarms will turn on the LED in the front panel to get the driver's attention if the temperature/pressure is above the setting point. It will also close a relay output port that can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan. each channel contains one relay. The meter stores the peak temperature/pressure with time stamps that can be checked later. It can also operate in the peak holding mode so that only the maximum value is displayed. The brightness of the LED display can be synchronized with headlight. When the headlight is turned on in the night, the display will be dimmed by the illumination signal. It can also be dimmed directly from the key pad. Developed based on industrial grade instruments, this four digits gauge offers up to 10 times the resolution and accuracy of most 3 digits gauges on the market. For thermocouple sensor, this gauge have a cold junction compensation circuit to improve the accuracy at low temperature and reduce the temperature drift when a thermocouple sensor is used. 
The gauge is 48 x 48 mm, slight smaller than 52mm round gauge. It is 85mm in depth. For the housing of this gauge, please check our CBox16-B

TC-KEGT Probe:

The gauge is supplied with your choice of two EGT (Exhaust Gas Temperature) sensors.  It is a K type thermocouple sensor with exposed tip junction for fast response time. The probe diameter is 3/16", with several mounting thread options available (choose from the drop down list). The insertion depth is adjustable with 1.3" maximum.  The default cable length is 78” (2 meters).  The maximum working temperature of the sensor is 1000 ºC (1800 ºF).

TC-KEGT Adapter Options:

This combo comes with two same EGT probe adapters. 8 adapters options are available.  

1/8NPT M8x1 M10x1 Weld-in Carbon
Weld-in SS 1/4NPT 1/4BSP 1/2NPT Clamp On
Clamp on Clamp on adapter

Gauge Specifications:

Input type Temperature Sensor, K, E, S, R, J, T, B, WRe3-WRe25, Pt100, Cu50
Pressure transducer, 0-375ohm, 0-5V, 0-75mV
Other transducer: 0-30 mV, 1-5V, 0-10V, 0-10mA, 0-20mA, 4-20mA
Display Two lines, Four digits. °F or °C, Bar, PSI, or user defined
Display resolution Thermocouple: 1°C, 1°F; RTD/CU50: 0.1°C, 0.1°F
Display brightness control 12 V illumination control signal, or key pad
Accuracy ±0.2% or ±1 unit of full input range
Control mode On-Off
Control output Relay contact: 3A at 240VAC
Alarm Relay (3A rating) high/low alarm
Recording function Maximum, Max time,
Recording time 100 hrs with 1 min, or 9999 second with 1 s resolution.
Power consumption 2 Watt
Power supply voltage rating 12 -30 VDC
Panel cutout dimension 45 x 45 mm
Dimension 48 x 48 x 85mm (1/16 DIN)

Click here for Gauge instruction manual.
Click here for EGT sensor installation guide for SYL-2813.

This product was added to our catalog on Friday 29 December, 2017.

Copyright © 2018 Contact