9-PIN 3PDT ON/ON Toggle Switch, RTD Sensor Switching


  • Model: TS3


Product Description:

This tiny switch has three poles and two positions. The rated current is 2A @250VAC or 5A @125VAC. It can be used to switch multiple small loads at one action. It can also be used to switch between two 3-wire PT100 RTD sensors. It takes much less space on the control panel compare to other switches. 

There is no center position for this switch, therefore if you only wire half the switch up, you end up with a 3PST (on/off). .
Number of poles: 3 poles
Switching positions: two positions (on/on)
Current rating: 5A @ 125VAC, 2A @ 250VAC
Mounting hole: 0.23” (5.7mm) diameter
Body size: 0.67x0.49x0.43” (17x12.5x11mm)
Overall height: 1.34” (34mm)

The wiring diagram matches the toggle position shown in the picture.

This product was added to our catalog on Thursday 17 July, 2014.

Copyright © 2018 auberins.com. Contact sales@auberins.com