Illuminated Metal Pushbutton Switch, 110VAC, 16mm

  • Model: SW9-110

Ask a Question

$10.97

Please Choose:





Add to Cart:

Two options are offered, maintained action and momentary action. The maintained push-button switch can be used to control the 120Vac power to devices such as controllers, buzzers, or small fans. The momentary push-button switch can be used as a start key or a reset key for timers. 

There are three poles on the switch for wiring a load. One is normally open pole, one is for normally closed pole, and the third pin is the common pole. 

For wholesale inquiries of SW9-110, please check SW9-UL, or contact us

Specifications

  SW9-110
LED Color red, blue, green, or white
LED Voltage 110 VAC
Operation Current Rating 5 A @ 120 VAC,
3 A @ 250 VAC
Panel Thickness 1 ~ 8 mm (5/16'')
Cutout Diameter 16.5 mm (5/8'')
Switch Terminals 1 NC + 1 NO
Operation Type maintained or momentary
Ingress Protection IP65
Body Material Copper plated Cr


Note: the nut and the gasket should both be installed behind the panel.

Four LED colors (blue/green/red/white) to choose from.
 
     
Left: Components included
Right: Maintained Action: ON position on the left, OFF position on the right, momentary action: Right
 
Dimensions (mm)
Typical wiring: Turn indicator on when button is pressed Indicator is always on
Keyword: Vandal-proof, Vandal-resistant switch

Current Reviews: 1

This product was added to our catalog on Friday 07 December, 2012.

Copyright © 2024 auberins.com.