Flashing Buzzer, 12 V DC/AC. 16 mm


  • Model: FLBuz-12


Product Description:

This flashing buzzer can be used to alarm the user if temperature is too high or too low when connected to an Auber Automobile Multimeter or a 12V powered PID controller's alarm output.  When the alarm condition meets, it will beep and flashing with red light. It is designed to be mounted on a panel with 16 mm mounting hole. It can be powered by either 12 VDC or 12VAC.

Please check the following demo video. The buzzer is connected to the gauge's high limit alarm. It will turn on when temperature reaches 900 degrees and off when temperature is below 898 degrees.


Mounting Cutout 16 mm (0.63")
Life ≥30000 hours
Brightness 40~60cd/sq. m
Voltage range ±20%
Dielectric Strength 2. 5kv
Front diameter 19.2 mm (0.75")
Total length 55 mm (2.15")
Insertion Length from the front panel 45mm (1.75")
Buzzer Level (10 cm away) 85dB

This product was added to our catalog on Sunday 22 May, 2011.

Copyright © 2018 auberins.com. Contact sales@auberins.com