Thermocouple Based Controller

  • Model: WS-1510DPMA

Ask a Question

Starting at: $150.00

Please Choose:



Manual Option




Add to Cart:

The WS-1510DPMA is a plug-n-play PID controller that accepts type K thermocouples. Although it is slightly less accurate than Auber's RTD sensor-based models (WS-1510ELPM/WS-1510EBPM), this controller offers a much wider control temperature range. This controller allows the user to regulate the temperature up to 1300°C (or 2300°F) when a proper thermocouple is used. Thermocouple sensors are also more robust than the thermistor that is commonly used in home appliances. It can be used to bend guitar sides, control coffee roasters, lead melting pots, small heat-treatment ovens, composite curing ovens, small kilns, oil baths, small stills, and more.

This controller has a 6-step programmable temperature profile. Users can set each step to different temperatures and durations. The duration of each step can be set from 1 to 9999 minutes. Please note, this is a step controller and not a ramp/soak controller. The advantage is that it is much easier to program. The limitation is that you can't control the ramp speed of each step. 

The controller has an internal buzzer alarm that can be used as a high-limit alarm. It can also be used as an open-loop alarm. If you forget to put the sensor in the system or the system has failed to change the temperature in 5 minutes, the open loop alarm will alert you.

Note: Refurbished product is limited in stock here.

 
Front View

 
 Back View

Sensors

The controller is shipped with one of the following probes. The TC-K3MM-C can be used for smokers. The 6" WRNK-191 can be used for a lead melting pot.

 
TC-K5 Bare sensor TC-K3MM-C for 900 °F (Typical application: Smoker)  


6" WRNK-191 for up to 2000 °F (Typical application: Lead melting pot)


If your application requires a different sensor, please check other type K thermocouples on our website. We will install a mini connector for the thermocouple you ordered.

Specifications:

Input voltage 100 to 240V AC 50 /60 Hz
Output voltage Same as the input
Maximum Current 15A at 120V, 12A at 240V
Fuse Size 15A Fast blow
Control Mode PID (Heating), ON/OFF (Heating/Cooling)
Output switching device Built-in optically isolated solid state relay with zero voltage crossing switching
Sensor Input K type thermocouple
Alarm High-limit alarm and Open-loop alarm with LED and buzzer
Timer Range 1 to 9999 minutes for each step, 6 steps total
Temperature resolution 1°C or 1°F
Temperature display range -200 to 1300°C or -200 to 2372°F
Temperature control range +5°C (°F) from room temperature to 1300°C (2300°F)
Temperature accuracy 0.2% +1°C (0.2% +2°F)
Dimension 6 x 3 x 8.3" (155 x 80 x 210 mm) W x H x D
Weight 3.2 lb (1.5 kg) 

                .
Warranty: 1 year for the controller. 90 days for the sensor.

[PDF] Instruction manual: WS-1510DPM.

[PDF] Instruction manual: WS-1510DPM (firmware v2.3.3, shipped after 3/20/2023).

Notes for customers outside North America
The input power cord has NEMA 5-15P plug. International customers can buy an adapter plug like this (link) from our website or from local stores. For the output socket, a two-prong EU plug can fit in. International customers can also buy an adapter for a US socket  (link) or a power cord with NEMA 5-15P plug (link) and install a plug that can fit into a local power strip.

For countries that use 220-240VAC power lines, the maximum control power of this controller is 2400 Watts.


This product was added to our catalog on Sunday 14 February, 2010.

Copyright © 2024 auberins.com.