Type K High Temperature Thermocouple for Heat Treatment

Model: WRNK-191

Starting at: $19.49

Please Choose:

Connector Option

Probe Length Option

Probe Option

Add to Cart:

This Type K transition-style high-temperature thermocouple probe can be used for glass kilns and heat treatment ovens. The maximum working temperature is 1100°C (2000°F). However, please note that for the 6" probe, the maximum insertion length is 3". The maximum temperature in the transition area (connecting the probe tip and cable) is 400°C (750°F).

Shown in the picture: 6" probe with spade connector (left) and 6" probe with thermocouple mini connector (right).

Available Connector Options. From left to right: Type K mini connector, spade connectors, and three-pin rewirable connector for AT100.

Note 1: To order the 10" probe, please select the probe length at the top of the page when placing the order.
Note 2: This probe doesn't fit Ad-KEGTS. If you need a compression fitting, please check WRNK-193 (3.0 mm diameter).

Note 3: This probe can be bent using tube benders. We can also bend the probe for you with a small amount of service fee. Please leave a note about this special request during checkout.

Note 4: Polarity of Type K thermocouples: 1) For red & yellow wires, the yellow wire is positive. 2) For red & blue wires, the red wire is positive.

Note 5: To extend the sensor cable, please use Type K thermocouple extension wires such as KX22GA, KX24GA, KX26GA, or KX23CON (with mini connectors). Using the wrong wire can cause measurement errors.

Specifications:

Probe length	6" (150 mm) or 10" (250 mm)
Probe diameter	5/32" (4.0 mm) for 6" and 10" probes
Tubing material	Inconel 600 alloy
Transition section dimension	0.3” in diameter and 1” long
Cable	6 ft (2 meters) long
Cable insulation	Fiberglass with stainless steel overbraid (900°F)

This product was added to our catalog on Wednesday 28 February, 2007.

Categories

New Products [more]

Reviews [more]

Featured [more]