K type TC w/ mounting bracket for oven, smoker and chimney

  • Model: TC-K-BR

Ask a Question

Starting at: $18.00

Please Choose:





Add to Cart:

This K type thermocouple is suitable for chimney, smoker and low temperature oven applications (see temp rating below). The thin diameter probe (1/8" or 3.0mm) offers fast response time in the air. The bracket on the probe allows it to be easily mounted to the wall of a sheet metal cabinet or chimney. User just needs to drill two 1/8" holes on the sheet metal. One for inserting the probe and other for installing a fixation screw (included). The bracket can also be attached to fixtures inside the oven.


Bracket dimensions  (mm)

4" (100 mm) long probe is offered. Long probe will reduce the temperature influence from the mounting site, providing a more accurate measurement. The diameter of the probe is 1/8” (3.0 mm) diameter made of stainless steel.  Cable length is 6 ft (2 meters). The bracket measures 0.575 x 1.625 in (15x42 mm). The holes will fit with #6 to #10 screws. Two connector options are available. You can either choose the spade connector (as shown in the product listing picture) or the two-pin mini connector (as shown in the picture below). 


TC-K-BR with mini connector installed.

 
 Connector comparison

Temperature rating: 
The maximum working temperature for the probe tip is 900°C (1650°F).
Cable insulation: Fiberglass with stainless steel overbraid (600°F max continuous, 900°F short-term peak).


This product was added to our catalog on Thursday 11 October, 2012.

Copyright © 2024 auberins.com.