This EGT probe, being the most durable type we offer, is widely used for aircraft applications (popular in Europe) and air intake temperature measurements. It is made of K type grounded thermocouples with a thin and sealed tip that is made of Inconel 600 alloy which provides the highest working temperature available for this type of sensor. The diameter of the probe is optimized to balance the requirement of mechanical stability and the response time.
This probe can also be used for air intake temperature measurement due to its small thermal mass.
Six types of mounting adapter are offered: 1/8" NPT, Weld-in Stainless Steel (SS), M8x1, M10x1, 1/4" NPT and 1/4" BSPT thread. Please make the selection at the "Mounting Type Option" box above. Please click here for extra fitting adapter.
 |
 |
 |
 |
 |
| 1/8NPT |
M8x1 |
M10x1 |
Weld-in SS |
Weld-in Carbon |
Note 1: If you don't need the fitting, please choose mounting option as "None".
Note 2: Polarity for spade connector option: the red spade connector is positive and the blue spade connector is negative.
Note 3: Clamp-on adapter range is 1.5" ~ 2.1”, 38 mm ~ 55 mm.
Specifications:
| Thermocouple type |
Type K |
| Grounding |
Grounded |
| Cable length |
6 ft (2 meters) |
| Cable |
Fiberglass insulated and multi-thread braided (900°F) |
| Probe sheath material |
Inconel 600 alloy |
| Probe diameter |
0.12" (3 mm) |
| Probe length |
6" (150 mm) |
| Max insertion depth |
3" (75 mm) |
| Compression fitting thread |
3/8"-24 |
| Maximum working temperature |
1100ºC (2000ºF) |
| Maximum temperature for the transition area |
400ºC (750ºF) |
| Transition area dimension |
0.3" in diameter and 1” long |
This product was added to our catalog on Wednesday 30 March, 2016.
