CUBE Tabletop Brewing Controller Kit (240V 30A 7200W)

Starting at: $325.00

  • Model: KIT-CUBE1


    Please Choose:

    RTD Probe Option:

    Output Connector Option

    Manual Option

Product Description:

This is a kit to DIY your CUBE Tabletop Brewing Controller. The circuit is designed for 240 VAC 30 A heating element with two 120V outlets for water and wort pumps. The EZboil® step mashing controller (DSPR310) has all the features you need to enjoy a wonderful brew day: step mashing mode, a multi-events timer mode to help brewers track duration of the whole boiling process and built-in relays to be synchronized with either mashing or boiling steps.

For more information about the DSPR310 controller, please go to here.

This kit includes each of the following:
  • A 9"x5"x8" instrument grade project enclosure with all precuts and a 40-A heat sink in silver color. 
  • A DSPR310 EZboil® controller has step mashing feature and multi-events functions.
  • A 40A Solid State Relay.
  • Two selector switches for pumps control.
  • A PT100 RTD temperature probe with 8 ft braided cable with XLRCON-M connector (black panel mount part).
  • Two fuse holders and two fuses.
  • A 2-pole 32A Breaker Switch for main power control.
  • Two NEMA 5-15R outlets for pumps.
  • NEMA L14-30P Flanged Inlet Locking Receptacle for input power.
  • NEMA L14-30R connector for power cord.
  • NEMA L6-30R Socket for output heater.
Seven tri-clamp probe options are available. Please leave a note for the tri-clamp probe# you need. 
Tri-clamp Probe# Part# Flange OD Probe Length
1 PT100-C 1.988” (50.5mm) 1.38” (35mm)
2 PT100-C 1.988” (50.5mm) 2.36” (60mm)
3 PT100-C 1.988” (50.5mm) 6” (150mm)
4 PT100-C 1.988” (50.5mm) 8” (200mm)
5 PT100-C-2 2.52” (64mm) 2.36” (60mm)
6 PT100-C-2 2.52” (64mm) 6” (150mm)
7 PT100-C-2 2.52” (64mm) 8” (200mm)
1) This kit is designed for North America AC power line that requires a four lines power connection (L1, L2, N and G). All the input/output connections are NEMA standard type.
2) Although the kit includes a breaker switch, it is recommended that to hook up this system with a GFCI or Earth Leak protected power line because water is involved in the brewing equipment.
3) Wires are not included in the kit. 
4) Input power cord is not included because each user may have different hook up requirement in terms of cable length and connection type. The input power connector is included.
To see the final look of an assembled unit, please click here
Tools Needed:
1) Philip Screw Driver(s).
2) Pliers (for tightening nuts).
3) Wire cutter, stripper and crimping tool.
4) Hot Glue Gun or Multi-Purpose Sealant (for NEMA 5-15R sockets and controller).
5) Ruler.
Warranty: 6 months..

This product was added to our catalog on Thursday 28 December, 2017.

Copyright © 2018 Contact