Control Panel DIY Wire and Wiring Fitting Kit

This is a KIT of tin-coated copper wiring accessories to build your control panel. This product will help DIYers to save a lot of time and cost by sourcing them from a variety of vendors.

There are a variety of benefits of using tin-coated copper wires. It can protect against oxidation and corrosion and protects the wire from premature cable failure. Tin-coated copper wire has the same conductivity as bare copper and it is easier to solder. In short, this will be the correct wire if one is looking for a longevity solution for the project.

The KIT includes the following:

6 AWG Stranded UL 1015 Wire (Optional)

• 2 ft Black
• 2 ft Red
• 2 ft Green

10 AWG Stranded UL 1015 Wire

• 10 ft Black
• 6 ft Red
• 5 ft Green

14 AWG Stranded UL 1015 Wire (Optional)

• 13 ft Black
• 13 ft White
• 6 ft Green

22 AWG PVC UL1007 Hook Up Wire

• 20 ft Black
• 10 ft White
• 10 ft Red
• 10 ft Yellow
• 10 ft Blue
• 10 ft Purple
• 10 ft Orange
• 10 ft Pink
• 10 ft Green

Flame Retardant Test for the UL 1015 Wire

UL Certified Terminal Assortment

• (100 pc) 22AWG #6 Spade Terminals (Red)
• (20 pc) 14 AWG #6 Spade Terminals (Blue)
• (5 pc) 10 AWG 1/4-inch Ring Terminals (Yellow)
• (6 pc)  10 AWG #10 Spade Terminals (Yellow)
• (20 pc) 22 AWG E0508 Ferrule
• (20 pc) 14 AWG E2510 Ferrule
• (20 pc) 10 AWG E6012 Ferrule

Other Accessories

• (50 pc) 3.6x140mm Nylon White Cable Ties
• (20 pc) 3/4-inch (19mm) Self-Adhesive Tie Mounts
• (5 pc) 1-inch (28mm) Self-Adhesive Tie Mounts
• (10 ft) 1/8-inch (3mm) OD Cable Wrap
• (3 ft) 3/8-inch (10mm) OD Cable Wrap
• (1 ft) 1/16-inch (2mm) OD Heat Shrink Tubing
• In-Line Fuse Holder With 2A Fast-Blow Fuse, 5x20mm

Warranty: 90 days