Illuminated Pushbutton Switch, 2 NO, 22mm. 120/240V


  • Model: SW1


    Please Choose:

Product Description:

Product update: the white color SW1 is no longer available. 

This push-button switch can be used to control the power of controller, a contactor, or a small power load (<10A at 240VAC). It contains two sets of normally open contacts (N. O.). The current rating is 10A at 240VAC. The illumination can be configured by user so that it will be either on when the button is pressed in, or always on. The voltage rating for the illumination is for 240VAC. However, it works fine for 120VAC with hardly any noticeable light intensity changes.  Five colors are offered, red, blue, green, and yellow. Two switch actions are available: maintained action or momentary action.

Operation Current Rating: 10A at 240 or 120VAC
Number of Contact: 2 Normally Open
Illumination Type: LED
Illumination color: red, blue, green, or yellow
Illumination Voltage: 240 or 120VAC
Mechanical Life: 3,000,000 Cycles
Electrical Life: 1,200,000 Cycles
Mounting Cutout: 7/8" in (22.5mm) Diameter
Length Behind the Mounting Panel: 70 mm  (2.75")



An example that shows how the switches look when illuminated. The illumination is powered by 120VAC.

Please click here for more blocks.

Click here to download the instruction manual.
lick here for Switch Selection Guide

This product was added to our catalog on Monday 04 July, 2011.

Copyright © 2018 Contact