Selector Switch, 3-Position Momentary 2 NO, 22mm


  • Model: SW17


Product Description:

This is a 3-position, 22 mm selector switch. It can switch to 2 momentary normally open postions. This selector can be used to selectively reset timers wired on two different circuits.  Flip the switch to the left, it can reset the timer conected to channel 1; flip the switch to the right, it can reset the timer connected to the channel 2. 

Rated current: 10A
Mechanical Life: 3,000,000 Cycles
Mounting Cutout: 7/8" in (22.5 mm) Diameter
2 normally open contact blocks included.

It allows you to momentarily close one of the two normally open channels, or leave both channels open.
Selector Position 1 (left): momentarily keep the channel 1 closed and the channel 2 open.
Selector Position 2 (center, resting position): Keep both channels open.
Selector Position 3 (right): momentarily keep the channel 1 open and the channel 2 closed.

Please click here for more blocks.
Click here for Switch Selection Guide

This product was added to our catalog on Tuesday 10 September, 2013.

Copyright © 2018 Contact