High Profile Compact Box for 1/16 DIN Controller and Gauge

This compact project box can be used to house a 1/16 DIN-sized PID controller, gauge, or timer. It protects the wiring terminals from accidental contact and helps prevent dust from entering the enclosure.

Compared with our similar Cbox16 enclosure, this box has a higher profile, making it suitable for housing a 1/16 DIN controller or gauge with a mounting bracket such as SYL-2813, SYL-2352, SYL-2342, SYL-2372, SYL-23x2P, AW-SYL-23x2P, etc. It can also be used as an enclosure for low-profile gauges and controllers such as ASL-52, SYL-2362, or SYL-2362B.  

The front panel has a 45 × 45 mm pre-cut opening that fits our 1/16 DIN-sized controllers. The user will need to drill a small hole in the back panel for the wires to pass through. For easy wiring and installation, the top cover can be slid off after removing the four screws located at the top of the front and back panels.

The box is made of aluminum with a black powder-coated finish.

Click here for how to cut the instrument panel

Disassembled CBox16-HP. 
 

Specifications:
Outer Dimensions (W x H x L): 3.54'' x 2.95'' x 5.47" (90 mm x 75 mm x 139 mm).
Front/Back Panel Thickness: 0.060'' (1.52 mm).
Front Panel Cutout: 44.8 (+/- 0.1) mm x 44.8 (+/- 0.1) mm.
Materials: Aluminum, black powder-coated.