This 20.0 mm coil is compatible with Auber's RDK-110, RDK-200, and RDK-300 controllers. It is not compatible with older models such as RDK-100 or RDK-150-DC controllers.
Pin assignment for this coil: 1 & 2: AC power to heater, 3: Thermocouple +, 4: Thermocouple -, 5: Ground.
This 20.0 mm coil is rated for 100 watts, offered in either 120 VAC or 220 VAC. The 120 V coil has a straight transition section as shown in the profile picture. The 220 V coil has a slight bend in the transition section, as shown in the image below. The bend in the transition section can help reduce the leverage created by the stem and the cable, and make the glass/coil setup more stable. If you need a straight coil instead, please leave a note with your order.
Among all the coil heaters we carry, this 20.0 mm coil's surface temperature is the closest to its sensor reading, with a temperature correction coefficient of 1.03, according to our testing results. Please refer to the supplementary manual for more details (For RDK-200, 300 only).
This listing is for a coil heater only. A nail is not included.
The 220 V version 20 mm coil with a bent transition section.
Specifications
Power Rating: 100 watts at 120V or 220V.
Coil Size: 20.0 mm I.D., 12.7 mm height.
Coil Material: 316L stainless steel.
Cable Length: 55 in long. Protect with a braided Kevlar sleeve.
Temperature Range: 200 to 1000°F.
Pin Assignment (5-pin XLR): 1 & 2: AC power, 3: TC+, 4: TC-, 5: Ground.
Refurbished items might be available in limited quantities. Please check the listing at MISC-ES.
Return policy: The return period for this coil is 30 days after the shipment date. The item must be in unused and salable condition. Customers must contact Auber customer support for a unique RMA number. Used coils are not returnable.
Click here to download the supplementary manual for 100W Coil (Flat Coil, 20.0mm Coil, 15.8mm Coil w/ Kevlar sleeve).
This product was added to our catalog on Monday 24 October, 2016.
